android_kernel_eebbk_sm6150/arch/arm64/boot/dts/qcom/pm6155.dtsi

/*
 * Copyright (c) 2018, 2020, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/input/qcom,qpnp-power-on.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/iio/qcom,spmi-vadc.h>

&spmi_bus {
	qcom,pm6155@0 {
		compatible = "qcom,spmi-pmic";
		reg = <0x0 SPMI_USID>;
		#address-cells = <2>;
		#size-cells = <0>;

		pm6155_1_tz: qcom,temp-alarm@2400 {
			compatible = "qcom,spmi-temp-alarm";
			reg = <0x2400 0x100>;
			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
			#thermal-sensor-cells = <0>;
			qcom,temperature-threshold-set = <1>;
		};

		qcom,power-on@800 {
			compatible = "qcom,qpnp-power-on";
			reg = <0x800 0x100>;
			interrupts = <0x0 0x8 0x0 IRQ_TYPE_NONE>,
				     <0x0 0x8 0x1 IRQ_TYPE_NONE>;
			interrupt-names = "kpdpwr", "resin";
			qcom,pon-dbc-delay = <15625>;
			qcom,kpdpwr-sw-debounce;
			qcom,system-reset;
			qcom,store-hard-reset-reason;

			qcom,pon_1 {
				qcom,pon-type = <PON_POWER_ON_TYPE_KPDPWR>;
				qcom,pull-up = <1>;
				linux,code = <KEY_POWER>;
			};

			qcom,pon_2 {
				qcom,pon-type = <PON_POWER_ON_TYPE_RESIN>;
				qcom,pull-up;
				linux,code = <KEY_VOLUMEDOWN>;
			};
		};

		pm6155_1_clkdiv: clock-controller@5b00 {
			compatible = "qcom,spmi-clkdiv";
			reg = <0x5b00 0x200>;
			#clock-cells = <1>;
			qcom,num-clkdivs = <2>;
			clock-output-names = "pm6155_1_div_clk1",
						"pm6155_1_div_clk2";
			clocks = <&clock_rpmh RPMH_CXO_CLK>;
			clock-names = "xo";
		};

		pm6155_1_rtc: qcom,pm6155_1_rtc {
			compatible = "qcom,qpnp-rtc";
			#address-cells = <1>;
			#size-cells = <1>;
			qcom,qpnp-rtc-write = <0>;
			qcom,qpnp-rtc-alarm-pwrup = <0>;

			qcom,pm6155_1_rtc_rw@6000 {
				reg = <0x6000 0x100>;
			};
			qcom,pm6155_1_rtc_alarm@6100 {
				reg = <0x6100 0x100>;
				interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
			};
		};

		pm6155_1_gpios: pinctrl@c000 {
			compatible = "qcom,spmi-gpio";
			reg = <0xc000 0xa00>;
			interrupts = <0x0 0xc0 0 IRQ_TYPE_NONE>,
					<0x0 0xc1 0 IRQ_TYPE_NONE>,
					<0x0 0xc2 0 IRQ_TYPE_NONE>,
					<0x0 0xc3 0 IRQ_TYPE_NONE>,
					<0x0 0xc4 0 IRQ_TYPE_NONE>,
					<0x0 0xc5 0 IRQ_TYPE_NONE>,
					<0x0 0xc6 0 IRQ_TYPE_NONE>,
					<0x0 0xc7 0 IRQ_TYPE_NONE>,
					<0x0 0xc8 0 IRQ_TYPE_NONE>,
					<0x0 0xc9 0 IRQ_TYPE_NONE>;
			interrupt-names = "pm6155_1_gpio1", "pm6155_1_gpio2",
					  "pm6155_1_gpio3", "pm6155_1_gpio4",
					  "pm6155_1_gpio5", "pm6155_1_gpio6",
					  "pm6155_1_gpio7", "pm6155_1_gpio8",
					  "pm6155_1_gpio9", "pm6155_1_gpio10";
			gpio-controller;
			#gpio-cells = <2>;
		};

		pm6155_1_sdam_2: sdam@b100 {
			compatible = "qcom,spmi-sdam";
			reg = <0xb100 0x100>;
		};

	};

	qcom,pm6155@1 {
		compatible ="qcom,spmi-pmic";
		reg = <0x1 SPMI_USID>;
		#address-cells = <2>;
		#size-cells = <0>;
	};

	/* below definitions are for the second instance of pm6155 */
	qcom,pm6155@4 {
		compatible = "qcom,spmi-pmic";
		reg = <0x4 SPMI_USID>;
		#address-cells = <1>;
		#size-cells = <1>;

		qcom,power-on@800 {
			compatible = "qcom,qpnp-power-on";
			reg = <0x800 0x100>;
		};

		pm6155_2_clkdiv: clock-controller@5b00 {
			compatible = "qcom,spmi-clkdiv";
			reg = <0x5b00 0x200>;
			#clock-cells = <1>;
			qcom,num-clkdivs = <2>;
			clock-output-names = "pm6155_2_div_clk1",
						"pm6155_2_div_clk2";
			clocks = <&clock_rpmh RPMH_CXO_CLK>;
			clock-names = "xo";
		};

		pm6155_2_gpios: pinctrl@c000 {
			compatible = "qcom,spmi-gpio";
			reg = <0xc000 0xa00>;
			interrupts = <0x4 0xc0 0 IRQ_TYPE_NONE>,
					<0x4 0xc1 0 IRQ_TYPE_NONE>,
					<0x4 0xc2 0 IRQ_TYPE_NONE>,
					<0x4 0xc3 0 IRQ_TYPE_NONE>,
					<0x4 0xc4 0 IRQ_TYPE_NONE>,
					<0x4 0xc5 0 IRQ_TYPE_NONE>,
					<0x4 0xc6 0 IRQ_TYPE_NONE>,
					<0x4 0xc7 0 IRQ_TYPE_NONE>,
					<0x4 0xc8 0 IRQ_TYPE_NONE>,
					<0x4 0xc9 0 IRQ_TYPE_NONE>;
			interrupt-names = "pm6155_2_gpio1", "pm6155_2_gpio2",
					"pm6155_2_gpio3", "pm6155_2_gpio4",
					"pm6155_2_gpio5", "pm6155_2_gpio6",
					"pm6155_2_gpio7", "pm6155_2_gpio8",
					"pm6155_2_gpio9", "pm6155_2_gpio10";
			gpio-controller;
			#gpio-cells = <2>;
		};
	};

	qcom,pm6155@5 {
		compatible ="qcom,spmi-pmic";
		reg = <0x5 SPMI_USID>;
		#address-cells = <1>;
		#size-cells = <1>;
	};
};

&thermal_zones {
	pm6155-1-tz {
		polling-delay-passive = <100>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pm6155_1_tz>;
		wake-capable-sensor;

		trips {
			pm6155_trip0: trip0 {
				temperature = <95000>;
				hysteresis = <0>;
				type = "passive";
			};

			pm6155_trip1: trip1 {
				temperature = <115000>;
				hysteresis = <0>;
				type = "passive";
			};

			trip2 {
				temperature = <145000>;
				hysteresis = <0>;
				type = "passive";
			};
		};
	};
};