android_kernel_eebbk_sm6150/arch/arm64/boot/dts/qcom/mdm9607-cdp.dtsi

/*
 * Copyright (c) 2015-2016, 2020, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include "mdm9607.dtsi"
#include "mdm9607-pinctrl.dtsi"
#include "mdm9607-display.dtsi"
#include "qpic-panel-ili-hvga.dtsi"

/ {
	bluetooth: bt_qca6174 {
		compatible = "qca,qca6174";
		qca,bt-reset-gpio = <&pm8019_gpios 2 0>; /* BT_EN */
		pinctrl-names = "default";
		pinctrl-0 = <&bt_en_default>;
		qca,bt-vdd-pa-supply = <&rome_vreg>;
		qca,bt-vdd-io-supply = <&mdm9607_l11>;
		qca,bt-vdd-xtal-supply = <&mdm9607_l2>;
		qca,bt-vdd-io-voltage-level = <1800000 1800000>;
		qca,bt-vdd-xtal-voltage-level = <1800000 1800000>;
	};
};

&soc {
};

&blsp1_uart5 {
	status = "ok"
	pinctrl-names = "default";
	pinctrl-0 = <&uart_console_sleep>;
};

&i2c_4 {
	status = "ok"
};

&spi_1 {
	status = "ok"
};

&blsp1_uart3 {
	status = "ok"
};

&qnand_1 {
	status = "ok"
};

&emac0 {
	status = "ok"
};

/* MPP pin 2 configs for SMB358 interrupt line */
&pm8019_mpps {

	/* MPP 2 configs for SMB358 interrupt line */
	smb_stat {
		smb_stat_default: smb_stat_default {
			pins = "mpp2";
			function = "digital";
			input-enable;
			power-source = <3>;
		};
	};

	emac_vreg {
		emac_vreg_default: emac_vreg_default { /* MPP 4 for emac_vreg*/
			pins = "mpp4";
			function = "digital";
			output-high;
			input-disable;
			power-source = <2>;
		};
	};

};

&pm8019_gpios {

	bt_en {
		bt_en_default: bt_en_default {  /* BT_EN GPIO 2*/
			pins = "gpio2";
			function = "normal";
			output-low;
			input-disable;
			bias-pull-down;
			power-source = <2>;
		};
	};

	/* PMIC GPIO 3 for rome_vreg */
	rome_vreg {
		rome_vreg_default: rome_vreg_default {
			pins = "gpio3";
			function = "normal";
			output-high;
			input-disable;
			qcom,drive-strength = <1>;
			power-source = <3>;
		};
	};

	/* sdcard_ext_vreg GPIO 4 */
	sdcard_vreg {
		sdcard_vreg_default: sdcard_vreg_default {
			pins = "gpio4";
			function = "normal";
			output-high;
			input-disable;
			qcom,drive-strength = <1>;
			power-source = <0>;
		};
	};

	/* ROME 32k GPIO 6 Sleep Clock */
	gpio@c500 {
		pins = "gpio6";
		function = "func2";
		output-low;
		input-disable;
		bias-pull-down;
		qcom,drive-strength = <2>;
		power-source = <0>;
	};

};

&pm8019_gpios {
	gpio@c300 { /* GPIO 4 */
		qcom,mode = <1>;		/* Digital output */
		qcom,output-type = <0>;		/* CMOS logic */
		qcom,invert = <0>;		/* Output high */
		qcom,vin-sel = <0>;		/* VPH_PWR */
		qcom,src-sel = <0>;		/* GPIO */
		qcom,out-strength = <1>;	/* Low drive strength */
		qcom,master-en = <1>;		/* Enable GPIO */
	};
};

/* MPP pin 4 configs for SGMII */
&pm8019_mpps {
	mpp@a300 { /* MPP 4 */
		qcom,mode = <1>;		/* Digital output */
		qcom,vin-sel = <2>;		/* 1.8V */
		qcom,src-sel = <0>;		/* Constant */
		qcom,master-en = <1>;		/* Enable GPIO */
		status = "okay";
	};
};

&i2c_4 {

	/* SMB358 charger configuration */
	smb358_otg_supply: smb358-charger@57 {
		compatible = "qcom,smb358-charger";
		regulator-name = "smb358_otg_vreg";
		reg = <0x57>;
		interrupt-parent = <&spmi_bus>;
		interrupts = <0x0 0xa1 0 IRQ_TYPE_NONE>;        /* PMIC MPP 2 */
		pinctrl-names = "default";
		pinctrl-0 = <&smb_stat_default>;
		io-channels = <&pm8019_vadc VADC_VBAT_SNS>,
			<&pm8019_vadc VADC_LR_MUX2_BAT_ID>;
		io-channel-names = "vbat_sns",
				"batt_id_therm";
		qcom,float-voltage-mv = <4200>;
		qcom,irq-gpio = <&pm8019_mpps 2 0>;
		qcom,chg-vadc = <&pm8019_vadc>;
		qcom,batt-id-vref-uv = <1800000>;
		qcom,batt-id-rpullup-kohm = <220>;
	};
};

&sdhc_1 {
	vdd-io-supply = <&mdm9607_l11>;
	qcom,vdd-io-always-on;
	qcom,vdd-io-voltage-level = <1800000 1800000>;
	qcom,vdd-io-current-level = <0 30000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&pmx_sdc1_clk_on &pmx_sdc1_cmd_on &pmx_sdc1_data_on
						&sdc1_wlan_gpio_active>;
	pinctrl-1 = <&pmx_sdc1_clk_off &pmx_sdc1_cmd_off &pmx_sdc1_data_off
						&sdc1_wlan_gpio_sleep>;
	qcom,nonremovable;
	qcom,core_3_0v_support;
	status = "ok"
};

&sdhc_2 {
	vdd-supply = <&sdcard_ext_vreg>;
	qcom,vdd-voltage-level = <2850000 2850000>;
	qcom,vdd-current-level = <15000 400000>;

	vdd-io-supply = <&mdm9607_l13>;
	qcom,vdd-io-voltage-level = <1800000 2850000>;
	qcom,vdd-io-current-level = <200 50000>;

	#address-cells = <0>;
	interrupt-parent = <&sdhc_2>;
	interrupts = <0 1 2>;
	#interrupt-cells = <1>;
	interrupt-map-mask = <0xffffffff>;
	interrupt-map = <0 &intc 0 125 0
			1 &intc 0 221 0
			2 &tlmm_pinmux 26 0>;
	interrupt-names = "hc_irq", "pwr_irq", "status_irq";
	cd-gpios = <&tlmm_pinmux 26 0x1>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;

	status = "disabled";
};

/* Display */
&mdss_qpic {
	pinctrl-names= "mdss_default", "mdss_sleep";
	pinctrl-0 = <&mdss_ldo_active &mdss_cs_active &mdss_te_active
		&mdss_rs_active &mdss_ad_active &mdss_bl_active>;
	pinctrl-1 = <&mdss_ldo_sleep &mdss_cs_sleep &mdss_te_sleep
		&mdss_rs_sleep &mdss_ad_sleep &mdss_bl_sleep>;
	status = "disabled";
};