41 lines
1.1 KiB
Plaintext
41 lines
1.1 KiB
Plaintext
Analogix ANX7625 SlimPort (Full-HD Transmitter)
|
|
-----------------------------------------------
|
|
|
|
The ANX7625 is DSI to DisplayPort bridge.
|
|
|
|
Required properties:
|
|
|
|
- compatible : "analogix,anx7625"
|
|
- reg : I2C address of the device
|
|
- interrupt-parent : Should be the phandle of the interrupt controller
|
|
that services interrupts for this device
|
|
- interrupts : Should contain the INTP interrupt
|
|
- cbl_det-gpios : Which GPIO to use for cable detection
|
|
- power_en-gpios : Which GPIO to use for power enable
|
|
- reset_n-gpios : Which GPIO to use for reset
|
|
- ports : Port 0 for DSI input, should be a reference to a
|
|
valid mipi_dsi_host device
|
|
|
|
Example:
|
|
|
|
anx7625: anx7625@ee {
|
|
compatible = "analogix,anx7625";
|
|
reg = <0xee>;
|
|
interrupt-parent = <&qup15>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* INTP */
|
|
cbl_det-gpio = <&qup15 1 GPIO_ACTIVE_HIGH>;
|
|
power_en-gpio = <&pio 27 GPIO_ACTIVE_HIGH>;
|
|
reset_n-gpio = <&pio 49 GPIO_ACTIVE_HIGH>;
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
anx7625_in: endpoint {
|
|
remote-endpoint = <&dsi_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|