/* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>

&soc {
	tlmm: pinctrl@400000 {
		compatible = "qcom,trinket-pinctrl";
		reg = <0x400000 0xc00000>;
		reg-names = "pinctrl";
		interrupts-extended = <&wakegic GIC_SPI 227 IRQ_TYPE_NONE>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		interrupt-parent = <&wakegpio>;
		#interrupt-cells = <2>;

		/* QUPv3_0 SE mappings */
		/* SE 0 pin mappings */
		qupv3_se0_i2c_pins: qupv3_se0_i2c_pins {
			qupv3_se0_i2c_active: qupv3_se0_i2c_active {
				mux {
					pins = "gpio0", "gpio1";
					function = "qup00";
				};

				config {
					pins = "gpio0", "gpio1";
					drive-strength = <2>;
					bias-disable;
				};
			};
			qupv3_se0_i2c_sleep: qupv3_se0_i2c_sleep {
				mux {
					pins = "gpio0", "gpio1";
					function = "gpio";
				};

				config {
					pins = "gpio0", "gpio1";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		/* SE 1 pin mappings */
		qupv3_se1_i2c_pins: qupv3_se1_i2c_pins {
			qupv3_se1_i2c_active: qupv3_se1_i2c_active {
				mux {
					pins = "gpio4", "gpio5";
					function = "qup01";
				};

				config {
					pins = "gpio4", "gpio5";
					drive-strength = <2>;
					bias-disable;
				};
			};
			qupv3_se1_i2c_sleep: qupv3_se1_i2c_sleep {
				mux {
					pins = "gpio4", "gpio5";
					function = "gpio";
				};

				config {
					pins = "gpio4", "gpio5";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		nfc {
			nfc_int_active: nfc_int_active {
				/* active state */
				mux {
					/* GPIO 85 NFC Read Interrupt */
					pins = "gpio85";
					function = "gpio";
				};

				config {
					pins = "gpio85";
					drive-strength = <2>; /* 2 MA */
					bias-pull-up;
				};
			};

			nfc_int_suspend: nfc_int_suspend {
				/* sleep state */
				mux {
					/* GPIO 85 NFC Read Interrupt */
					pins = "gpio85";
					function = "gpio";
				};

				config {
					pins = "gpio85";
					drive-strength = <2>; /* 2 MA */
					bias-pull-up;
				};
			};

			nfc_enable_active: nfc_enable_active {
				/* active state */
				mux {
					/* 83: Enable 84: Firmware */
					pins = "gpio83", "gpio84";
					function = "gpio";
				};

				config {
					pins = "gpio83", "gpio84";
					drive-strength = <2>; /* 2 MA */
					bias-pull-up;
				};
			};

			nfc_enable_suspend: nfc_enable_suspend {
				/* sleep state */
				mux {
					/* 83: Enable 84: Firmware */
					pins = "gpio83", "gpio84";
					function = "gpio";
				};

				config {
					pins = "gpio83", "gpio84";
					drive-strength = <2>; /* 2 MA */
					bias-disable;
				};
			};

			nfc_clk_req_active: nfc_clk_req_active {
				/* active state */
				mux {
					/* GPIO 95: NFC CLOCK REQUEST */
					pins = "gpio95";
					function = "gpio";
				};

				config {
					pins = "gpio95";
					drive-strength = <2>; /* 2 MA */
					bias-pull-up;
				};
			};

			nfc_clk_req_suspend: nfc_clk_req_suspend {
				/* sleep state */
				mux {
					/* GPIO 95: NFC CLOCK REQUEST */
					pins = "gpio95";
					function = "gpio";
				};

				config {
					pins = "gpio95";
					drive-strength = <2>; /* 2 MA */
					bias-disable;
				};
			};
		};

		/* SE 2 pin mappings */
		qupv3_se2_i2c_pins: qupv3_se2_i2c_pins {
			qupv3_se2_i2c_active: qupv3_se2_i2c_active {
				mux {
					pins = "gpio6", "gpio7";
					function = "qup02";
				};

				config {
					pins = "gpio6", "gpio7";
					drive-strength = <2>;
					bias-disable;
				};
			};
			qupv3_se2_i2c_sleep: qupv3_se2_i2c_sleep {
				mux {
					pins = "gpio6", "gpio7";
					function = "gpio";
				};

				config {
					pins = "gpio6", "gpio7";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		/* SE 3 pin mappings */
		qupv3_se3_i2c_pins: qupv3_se3_i2c_pins {
			qupv3_se3_i2c_active: qupv3_se3_i2c_active {
				mux {
						pins = "gpio14", "gpio15";
						function = "qup03";
				};

				config {
						pins = "gpio14", "gpio15";
						drive-strength = <2>;
						bias-disable;
				};
			};

			qupv3_se3_i2c_sleep: qupv3_se3_i2c_sleep {
				mux {
						pins = "gpio14", "gpio15";
						function = "gpio";
				};

				config {
						pins = "gpio14", "gpio15";
						drive-strength = <2>;
						bias-pull-up;
				};
			};
		};

		/* SE 4 pin mappings */
		qupv3_se4_i2c_pins: qupv3_se4_i2c_pins {
			qupv3_se4_i2c_active: qupv3_se4_i2c_active {
				mux {
						pins = "gpio16", "gpio17";
						function = "qup04";
				};

				config {
						pins = "gpio16", "gpio17";
						drive-strength = <2>;
						bias-disable;
				};
			};

			qupv3_se4_i2c_sleep: qupv3_se4_i2c_sleep {
				mux {
						pins = "gpio16", "gpio17";
						function = "gpio";
				};

				config {
						pins = "gpio16", "gpio17";
						drive-strength = <2>;
						bias-pull-up;
				};
			};
		};

		/*QUPv3_1 SE mappings */
		/* SE 5 pin mappings */
		qupv3_se5_i2c_pins: qupv3_se5_i2c_pins {
			qupv3_se5_i2c_active: qupv3_se5_i2c_active {
				mux {
						pins = "gpio22", "gpio23";
						function = "qup10";
				};

				config {
						pins = "gpio22", "gpio23";
						drive-strength = <2>;
						bias-disable;
				};
			};

			qupv3_se5_i2c_sleep: qupv3_se5_i2c_sleep {
				mux {
						pins = "gpio22", "gpio23";
						function = "gpio";
				};

				config {
						pins = "gpio22", "gpio23";
						drive-strength = <2>;
						bias-pull-up;
				};
			};
		};

		/* SE 6 pin mappings */
		qupv3_se6_i2c_pins: qupv3_se6_i2c_pins {
			qupv3_se6_i2c_active: qupv3_se6_i2c_active {
				mux {
						pins = "gpio30", "gpio31";
						function = "qup11";
				};

				config {
						pins = "gpio30", "gpio31";
						drive-strength = <2>;
						bias-disable;
				};
			};

			qupv3_se6_i2c_sleep: qupv3_se6_i2c_sleep {
				mux {
						pins = "gpio30", "gpio31";
						function = "gpio";
				};

				config {
						pins = "gpio30", "gpio31";
						drive-strength = <2>;
						bias-pull-up;
				};
			};
		};

		/* SE 7 pin mappings */
		qupv3_se7_i2c_pins: qupv3_se7_i2c_pins {
			qupv3_se7_i2c_active: qupv3_se7_i2c_active {
				mux {
						pins = "gpio28", "gpio29";
						function = "qup12";
				};

				config {
						pins = "gpio28", "gpio29";
						drive-strength = <2>;
						bias-disable;
				};
			};

			qupv3_se7_i2c_sleep: qupv3_se7_i2c_sleep {
				mux {
						pins = "gpio28", "gpio29";
						function = "gpio";
				};

				config {
						pins = "gpio28", "gpio29";
						drive-strength = <2>;
						bias-pull-up;
				};
			};
		};

		/* SE 8 pin mappings */
		qupv3_se8_i2c_pins: qupv3_se8_i2c_pins {
			qupv3_se8_i2c_active: qupv3_se8_i2c_active {
				mux {
						pins = "gpio18", "gpio19";
						function = "qup13";
				};

				config {
						pins = "gpio18", "gpio19";
						drive-strength = <2>;
						bias-disable;
				};
			};

			qupv3_se8_i2c_sleep: qupv3_se8_i2c_sleep {
				mux {
						pins = "gpio18", "gpio19";
						function = "gpio";
				};

				config {
						pins = "gpio18", "gpio19";
						drive-strength = <2>;
						bias-pull-up;
				};
			};
		};

		/* SE 9 pin mappings */
		qupv3_se9_i2c_pins: qupv3_se9_i2c_pins {
			qupv3_se9_i2c_active: qupv3_se9_i2c_active {
				mux {
						pins = "gpio10", "gpio11";
						function = "qup14";
				};

				config {
						pins = "gpio10", "gpio11";
						drive-strength = <2>;
						bias-disable;
				};
			};

			qupv3_se9_i2c_sleep: qupv3_se9_i2c_sleep {
				mux {
						pins = "gpio10", "gpio11";
						function = "gpio";
				};

				config {
						pins = "gpio10", "gpio11";
						drive-strength = <2>;
						bias-pull-up;
				};
			};
		};

		qupv3_se3_4uart_pins: qupv3_se3_4uart_pins {
			qupv3_se3_rx: qupv3_se3_rx {
				mux {
					pins = "gpio15";
					function = "qup03";
				};

				config {
					pins = "gpio15";
					drive-strength = <2>;
					bias-no-pull;
				};
			};

			qupv3_se3_tx: qupv3_se6_tx {
				mux {
					pins = "gpio14";
					function = "qup03";
				};

				config {
					pins = "gpio14";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		qupv3_se4_2uart_pins: qupv3_se4_2uart_pins {
			qupv3_se4_2uart_active: qupv3_se4_2uart_active {
				mux {
					pins = "gpio16", "gpio17";
					function = "qup04";
				};

				config {
						pins = "gpio16", "gpio17";
						drive-strength = <2>;
						bias-disable;
				};
			};

			qupv3_se4_2uart_sleep: qupv3_se4_2uart_sleep {
				mux {
						pins = "gpio16", "gpio17";
						function = "gpio";
				};

				config {
						pins = "gpio16", "gpio17";
						drive-strength = <2>;
						bias-pull-down;
				};
			};
		};

		qupv3_se6_4uart_pins: qupv3_se6_4uart_pins {
			qupv3_se6_ctsrx: qupv3_se6_ctsrx {
				mux {
					pins = "gpio30", "gpio33";
					function = "qup11";
				};

				config {
					pins = "gpio30", "gpio33";
					drive-strength = <2>;
					bias-no-pull;
				};
			};

			qupv3_se6_rts: qupv3_se6_rts {
				mux {
					pins = "gpio31";
					function = "qup11";
				};

				config {
					pins = "gpio31";
					drive-strength = <2>;
					bias-pull-down;
				};
			};

			qupv3_se6_tx: qupv3_se6_tx {
				mux {
					pins = "gpio32";
					function = "qup11";
				};

				config {
					pins = "gpio32";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		qupv3_se9_4uart_pins: qupv3_se9_4uart_pins {
			qupv3_se9_ctsrx: qupv3_se9_ctsrx {
				mux {
					pins = "gpio10", "gpio13";
					function = "qup14";
				};

				config {
					pins = "gpio10", "gpio13";
					drive-strength = <2>;
					bias-no-pull;
				};
			};

			qupv3_se9_rts: qupv3_se9_rts {
				mux {
					pins = "gpio11";
					function = "qup14";
				};

				config {
					pins = "gpio11";
					drive-strength = <2>;
					bias-pull-down;
				};
			};

			qupv3_se9_tx: qupv3_se9_tx {
				mux {
					pins = "gpio12";
					function = "qup14";
				};

				config {
					pins = "gpio12";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		/* SPI Instances */
		/* SE 0 pin mappings */
		qupv3_se0_spi_pins: qupv3_se0_spi_pins {
			qupv3_se0_spi_active: qupv3_se0_spi_active {
				mux {
					pins = "gpio0", "gpio1", "gpio2",
								"gpio3";
					function = "qup00";
				};

				config {
					pins = "gpio0", "gpio1", "gpio2",
								"gpio3";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se0_spi_sleep: qupv3_se0_spi_sleep {
				mux {
					pins = "gpio0", "gpio1", "gpio2",
								"gpio3";
					function = "gpio";
				};

				configs {
					pins = "gpio0", "gpio1", "gpio2",
								"gpio3";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		/* SE 2 pin mappings */
		qupv3_se2_spi_pins: qupv3_se2_spi_pins {
			qupv3_se2_spi_active: qupv3_se2_spi_active {
				mux {
					pins = "gpio6", "gpio7", "gpio8",
								"gpio9";
					function = "qup02";
				};

				config {
					pins = "gpio6", "gpio7", "gpio8",
								"gpio9";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se2_spi_sleep: qupv3_se2_spi_sleep {
				mux {
					pins = "gpio6", "gpio7", "gpio8",
								"gpio9";
					function = "gpio";
				};

				configs {
					pins = "gpio6", "gpio7", "gpio8",
								"gpio9";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		/* SE 5 pin mappings */
		qupv3_se5_spi_pins: qupv3_se5_spi_pins {
			qupv3_se5_spi_active: qupv3_se5_spi_active {
				mux {
					pins = "gpio22", "gpio23", "gpio24",
								"gpio25";
					function = "qup10";
				};

				config {
					pins = "gpio22", "gpio23", "gpio24",
								"gpio25";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se5_spi_sleep: qupv3_se5_spi_sleep {
				mux {
					pins = "gpio22", "gpio23", "gpio24",
								"gpio25";
					function = "gpio";
				};

				configs {
					pins = "gpio22", "gpio23", "gpio24",
								"gpio25";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		/* SE 6 pin mappings */
		qupv3_se6_spi_pins: qupv3_se6_spi_pins {
			qupv3_se6_spi_active: qupv3_se6_spi_active {
				mux {
					pins = "gpio30", "gpio31", "gpio32",
								"gpio33";
					function = "qup11";
				};

				config {
					pins = "gpio30", "gpio31", "gpio32",
								"gpio33";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se6_spi_sleep: qupv3_se6_spi_sleep {
				mux {
					pins = "gpio30", "gpio31", "gpio32",
								"gpio33";
					function = "gpio";
				};

				configs {
					pins = "gpio30", "gpio31", "gpio32",
								"gpio33";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		/* SE 8 pin mappings */
		qupv3_se8_spi_pins: qupv3_se8_spi_pins {
			qupv3_se8_spi_active: qupv3_se8_spi_active {
				mux {
					pins = "gpio18", "gpio19", "gpio20",
								"gpio21";
					function = "qup13";
				};

				config {
					pins = "gpio18", "gpio19", "gpio20",
								"gpio21";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se8_spi_sleep: qupv3_se8_spi_sleep {
				mux {
					pins = "gpio18", "gpio19", "gpio20",
								"gpio21";
					function = "gpio";
				};

				configs {
					pins = "gpio18", "gpio19", "gpio20",
								"gpio21";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		/* SE 9 pin mappings */
		qupv3_se9_spi_pins: qupv3_se9_spi_pins {
			qupv3_se9_spi_active: qupv3_se9_spi_active {
				mux {
					pins = "gpio10", "gpio11", "gpio12",
								"gpio13";
					function = "qup_14";
				};

				config {
					pins = "gpio10", "gpio11", "gpio12",
								"gpio13";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se9_spi_sleep: qupv3_se9_spi_sleep {
				mux {
					pins = "gpio10", "gpio11", "gpio12",
								"gpio13";
					function = "gpio";
				};

				configs {
					pins = "gpio10", "gpio11", "gpio12",
								"gpio13";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		fsa_usbc_ana_en_n@124 {
			fsa_usbc_ana_en: fsa_usbc_ana_en {
				mux {
					pins = "gpio124";
					function = "gpio";
				};

				config {
					pins = "gpio124";
					drive-strength = <2>;
					bias-disable;
					output-low;
				};
			};
		};

		wsa_swr_clk_pin {
			wsa_swr_clk_sleep: wsa_swr_clk_sleep {
				mux {
					pins = "gpio18";
					function = "WSA_CLK";
				};

				config {
					pins = "gpio18";
					drive-strength = <2>;
					bias-bus-hold;
				};
			};

			wsa_swr_clk_active: wsa_swr_clk_active {
				mux {
					pins = "gpio18";
					function = "WSA_CLK";
				};

				config {
					pins = "gpio18";
					drive-strength = <2>;
					bias-bus-hold;
				};
			};
		};

		wsa_swr_data_pin {
			wsa_swr_data_sleep: wsa_swr_data_sleep {
				mux {
					pins = "gpio19";
					function = "WSA_DATA";
				};

				config {
					pins = "gpio19";
					drive-strength = <4>;
					bias-bus-hold;
				};
			};

			wsa_swr_data_active: wsa_swr_data_active {
				mux {
					pins = "gpio19";
					function = "WSA_DATA";
				};

				config {
					pins = "gpio19";
					drive-strength = <4>;
					bias-bus-hold;
				};
			};
		};

		/* WSA speaker reset pins */
		spkr_1_sd_n {
			spkr_1_sd_n_sleep: spkr_1_sd_n_sleep {
				mux {
					pins = "gpio20";
					function = "gpio";
				};

				config {
					pins = "gpio20";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;
					input-enable;
				};
			};

			spkr_1_sd_n_active: spkr_1_sd_n_active {
				mux {
					pins = "gpio20";
					function = "gpio";
				};

				config {
					pins = "gpio20";
					drive-strength = <16>;   /* 16 mA */
					bias-disable;
					output-high;
				};
			};
		};

		wcd9xxx_intr {
			wcd_intr_default: wcd_intr_default{
				mux {
					pins = "gpio110";
					function = "gpio";
				};

				config {
					pins = "gpio110";
					drive-strength = <2>; /* 2 mA */
					bias-pull-down; /* pull down */
					input-enable;
				};
			};
		};

		tasha_cdc_reset_active: lpi_cdc_reset_active {
			mux {
				pins = "gpio120";
				function = "gpio";
			};
			config {
				pins = "gpio120";
				drive-strength = <16>;
				output-high;
			};
		};

		tasha_cdc_reset_sleep: lpi_cdc_reset_sleep {
			mux {
				pins = "gpio120";
				function = "gpio";
			};

			config {
				pins = "gpio120";
				drive-strength = <16>;
				bias-disable;
				output-low;
			};
		};

		/* Tasha WSA speaker reset pins */
		tasha_spkr_1_sd_n {
			tasha_spkr_1_sd_n_sleep: tasha_spkr_1_sd_n_sleep {
				mux {
					pins = "gpio20";
					function = "gpio";
				};

				config {
					pins = "gpio20";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;
					input-enable;
				};
			};

			tasha_spkr_1_sd_n_active: tasha_spkr_1_sd_n_active {
				mux {
					pins = "gpio20";
					function = "gpio";
				};

				config {
					pins = "gpio20";
					drive-strength = <16>;   /* 16 mA */
					bias-disable;
					output-high;
				};
			};
		};

		tasha_spkr_2_sd_n {
			tasha_spkr_2_sd_n_sleep: tasha_spkr_2_sd_n_sleep {
				mux {
					pins = "gpio21";
					function = "gpio";
				};

				config {
					pins = "gpio21";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;
					input-enable;
				};
			};

			tasha_spkr_2_sd_n_active: tasha_spkr_2_sd_n_active {
				mux {
					pins = "gpio21";
					function = "gpio";
				};

				config {
					pins = "gpio21";
					drive-strength = <16>;   /* 16 mA */
					bias-disable;
					output-high;
				};
			};
		};

		audio_ref_clk_active: audio_ref_clk_active {
			mux {
				pins = "gpio112";
				function = "gpio";
			};

			config {
				pins = "gpio112";
				drive-strength = <8>;
				bias-disable;
				output-low;
			};
		};

		audio_ref_clk_sleep: audio_ref_clk_sleep {
			mux {
				pins = "gpio112";
				function = "gpio";
			};

			config {
				pins = "gpio112";
				drive-strength = <2>;
				bias-disable;
				bias-pull-down;
			};
		};

		wcd937x_reset_active: wcd937x_reset_active {
			mux {
				pins = "gpio120";
				function = "gpio";
			};
			config {
				pins = "gpio120";
				drive-strength = <16>;
				output-high;
			};
		};

		wcd937x_reset_sleep: wcd937x_reset_sleep {
			mux {
				pins = "gpio120";
				function = "gpio";
			};

			config {
			pins = "gpio120";
				drive-strength = <16>;
				bias-disable;
				output-low;
			};
		};

		cdc_dmic01_clk_active: dmic01_clk_active {
			mux {
				pins = "gpio125";
				function = "DMIC0_CLK";
			};

			config {
				pins = "gpio125";
				drive-strength = <8>;
				output-high;
			};
		};

		cdc_dmic01_clk_sleep: dmic01_clk_sleep {
			mux {
				pins = "gpio125";
				function = "DMIC0_CLK";
			};

			config {
				pins = "gpio125";
				drive-strength = <2>;
				bias-disable;
				output-low;
			};
		};

		cdc_dmic01_data_active: dmic01_data_active {
			mux {
				pins = "gpio126";
				function = "DMIC0_DATA";
			};

			config {
				pins = "gpio126";
				drive-strength = <8>;
				input-enable;
			};
		};

		cdc_dmic01_data_sleep: dmic01_data_sleep {
			mux {
				pins = "gpio126";
				function = "DMIC0_DATA";
			};

			config {
				pins = "gpio126";
				drive-strength = <2>;
				pull-down;
				input-enable;
			};
		};

		cdc_dmic23_clk_active: dmic23_clk_active {
			mux {
				pins = "gpio127";
				function = "DMIC1_CLK";
			};

			config {
				pins = "gpio127";
				drive-strength = <8>;
				output-high;
			};
		};

		cdc_dmic23_clk_sleep: dmic23_clk_sleep {
			mux {
				pins = "gpio127";
				function = "DMIC1_CLK";
			};

			config {
				pins = "gpio127";
				drive-strength = <2>;
				bias-disable;
				output-low;
			};
		};

		cdc_dmic23_data_active: dmic23_data_active {
			mux {
				pins = "gpio128";
				function = "DMIC1_DATA";
			};

			config {
				pins = "gpio128";
				drive-strength = <8>;
				input-enable;
			};
		};

		cdc_dmic23_data_sleep: dmic23_data_sleep {
			mux {
				pins = "gpio128";
				function = "DMIC1_DATA";
			};

			config {
				pins = "gpio128";
				drive-strength = <2>;
				pull-down;
				input-enable;
			};
		};

		tx_swr_clk_sleep: tx_swr_clk_sleep {
			mux {
				pins = "gpio106";
				function = "swr_tx";
			};

			config {
				pins = "gpio106";
				drive-strength = <2>;
				bias-bus-hold;
			};
		};

		tx_swr_clk_active: tx_swr_clk_active {
			mux {
				pins = "gpio106";
				function = "swr_tx";
			};

			config {
				pins = "gpio106";
				drive-strength = <10>;
				bias-bus-hold;
			};
		};

		tx_swr_data1_sleep: tx_swr_data1_sleep {
			mux {
				pins = "gpio107";
				function = "swr_tx";
			};

			config {
				pins = "gpio107";
				drive-strength = <2>;
				bias-bus-hold;
			};
		};

		tx_swr_data1_active: tx_swr_data1_active {
			mux {
				pins = "gpio107";
				function = "swr_tx";
			};

			config {
				pins = "gpio107";
				drive-strength = <10>;
				bias-bus-hold;
			};
		};

		tx_swr_data2_sleep: tx_swr_data2_sleep {
			mux {
				pins = "gpio108";
				function = "swr_tx";
			};

			config {
				pins = "gpio108";
				drive-strength = <2>;
				bias-bus-hold;
			};
		};

		tx_swr_data2_active: tx_swr_data2_active {
			mux {
				pins = "gpio108";
				function = "swr_tx";
			};

			config {
				pins = "gpio108";
				drive-strength = <10>;
				bias-bus-hold;
			};
		};

		rx_swr_clk_sleep: rx_swr_clk_sleep {
			mux {
				pins = "gpio110";
				function = "swr_rx";
			};

			config {
				pins = "gpio110";
				drive-strength = <2>;
				bias-bus-hold;
			};
		};

		rx_swr_clk_active: rx_swr_clk_active {
			mux {
				pins = "gpio110";
				function = "swr_rx";
			};

			config {
				pins = "gpio110";
				drive-strength = <10>;
				bias-bus-hold;
			};
		};

		rx_swr_data_sleep: rx_swr_data_sleep {
			mux {
				pins = "gpio111", "gpio112";
				function = "swr_rx";
			};

			config {
				pins = "gpio111", "gpio112";
				drive-strength = <2>;
				bias-bus-hold;
			};
		};

		rx_swr_data_active: rx_swr_data_active {
			mux {
				pins = "gpio111", "gpio112";
				function = "swr_rx";
			};

			config {
				pins = "gpio111", "gpio112";
				drive-strength = <10>;
				bias-bus-hold;
			};
		};

		pmx_sde: pmx_sde {
			sde_dsi_active: sde_dsi_active {
				mux {
					pins = "gpio90";
					function = "gpio";
				};

				config {
					pins = "gpio90";
					drive-strength = <8>;   /* 8 mA */
					bias-disable = <0>;   /* no pull */
				};
			};

			sde_dsi_suspend: sde_dsi_suspend {
				mux {
					pins = "gpio90";
					function = "gpio";
				};

				config {
					pins = "gpio90";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;         /* PULL DOWN */
				};
			};
		};

		pmx_sde_te {
			sde_te_active: sde_te_active {
				mux {
					pins = "gpio89";
					function = "mdp_vsync";
				};

				config {
					pins = "gpio89";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;         /* PULL DOWN */
				};
			};

			sde_te_suspend: sde_te_suspend {
				mux {
					pins = "gpio89";
					function = "mdp_vsync";
				};

				config {
					pins = "gpio89";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;         /* PULL DOWN */
				};
			};
		};

		sde_dp_usbplug_cc_active: sde_dp_usbplug_cc_active {
			mux {
				pins = "gpio102";
				function = "gpio";
			};

			config {
				pins = "gpio102";
				bias-disable;
				drive-strength = <16>;
			};
		};

		sde_dp_usbplug_cc_suspend: sde_dp_usbplug_cc_suspend {
			mux {
				pins = "gpio102";
				function = "gpio";
			};

			config {
				pins = "gpio102";
				bias-pull-down;
				drive-strength = <2>;
			};
		};

		sde_dp_hotplug_ctrl: sde_dp_hotplug_ctrl {
			mux {
				pins = "gpio100";
				function = "dp_hot";
			};

			config {
				pins = "gpio100";
				bias-disable;
				input-enable;
				drive-strength = <2>;
			};
		};

		sde_dp_hotplug_tlmm: sde_dp_hotplug_tlmm {
			mux {
				pins = "gpio100";
				function = "gpio";
			};

			config {
				pins = "gpio100";
				bias-disable;
				input-enable;
				drive-strength = <2>;
			};
		};

		/* SDC pin type */
		sdc1_clk_on: sdc1_clk_on {
			config {
				pins = "sdc1_clk";
				bias-disable;		/* NO pull */
				drive-strength = <16>;	/* 16 MA */
			};
		};

		sdc1_clk_off: sdc1_clk_off {
			config {
				pins = "sdc1_clk";
				bias-disable;		/* NO pull */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc1_cmd_on: sdc1_cmd_on {
			config {
				pins = "sdc1_cmd";
				bias-pull-up;		/* pull up */
				drive-strength = <10>;	/* 10 MA */
			};
		};

		sdc1_cmd_off: sdc1_cmd_off {
			config {
				pins = "sdc1_cmd";
				num-grp-pins = <1>;
				bias-pull-up;		/* pull up */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc1_data_on: sdc1_data_on {
			config {
				pins = "sdc1_data";
				bias-pull-up;		/* pull up */
				drive-strength = <10>;	/* 10 MA */
			};
		};

		sdc1_data_off: sdc1_data_off {
			config {
				pins = "sdc1_data";
				bias-pull-up;		/* pull up */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc1_rclk_on: sdc1_rclk_on {
			config {
				pins = "sdc1_rclk";
				bias-pull-down; /* pull down */
			};
		};

		sdc1_rclk_off: sdc1_rclk_off {
			config {
				pins = "sdc1_rclk";
				bias-pull-down; /* pull down */
			};
		};

		sdc2_clk_on: sdc2_clk_on {
			config {
				pins = "sdc2_clk";
				bias-disable;		/* NO pull */
				drive-strength = <16>;	/* 16 MA */
			};
		};

		sdc2_clk_off: sdc2_clk_off {
			config {
				pins = "sdc2_clk";
				bias-disable;		/* NO pull */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc2_cmd_on: sdc2_cmd_on {
			config {
				pins = "sdc2_cmd";
				bias-pull-up;		/* pull up */
				drive-strength = <10>;	/* 10 MA */
			};
		};

		sdc2_cmd_off: sdc2_cmd_off {
			config {
				pins = "sdc2_cmd";
				bias-pull-up;		/* pull up */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc2_data_on: sdc2_data_on {
			config {
				pins = "sdc2_data";
				bias-pull-up;		/* pull up */
				drive-strength = <10>;	/* 10 MA */
			};
		};

		sdc2_data_off: sdc2_data_off {
			config {
				pins = "sdc2_data";
				bias-pull-up;		/* pull up */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc2_cd_on: cd_on {
			mux {
				pins = "gpio98";
				function = "gpio";
			};

			config {
				pins = "gpio98";
				drive-strength = <2>;
				bias-pull-up;
			};
		};

		sdc2_cd_off: cd_off {
			mux {
				pins = "gpio98";
				function = "gpio";
			};

			config {
				pins = "gpio98";
				drive-strength = <2>;
				bias-disable;
			};
		};

		ufs_dev_reset_assert: ufs_dev_reset_assert {
			config {
				pins = "ufs_reset";
				bias-pull-down;		/* default: pull down */
				/*
				 * UFS_RESET driver strengths are having
				 * different values/steps compared to typical
				 * GPIO drive strengths.
				 *
				 * Following table clarifies:
				 *
				 * HDRV value | UFS_RESET | Typical GPIO
				 *   (dec)    |   (mA)    |    (mA)
				 *     0      |   0.8     |    2
				 *     1      |   1.55    |    4
				 *     2      |   2.35    |    6
				 *     3      |   3.1     |    8
				 *     4      |   3.9     |    10
				 *     5      |   4.65    |    12
				 *     6      |   5.4     |    14
				 *     7      |   6.15    |    16
				 *
				 * POR value for UFS_RESET HDRV is 3 which means
				 * 3.1mA and we want to use that. Hence just
				 * specify 8mA to "drive-strength" binding and
				 * that should result into writing 3 to HDRV
				 * field.
				 */
				drive-strength = <8>;	/* default: 3.1 mA */
				output-low; /* active low reset */
			};
		};

		ufs_dev_reset_deassert: ufs_dev_reset_deassert {
			config {
				pins = "ufs_reset";
				bias-pull-down;		/* default: pull down */
				/*
				 * default: 3.1 mA
				 * check comments under ufs_dev_reset_assert
				 */
				drive-strength = <8>;
				output-high; /* active low reset */
			};
		};

		pmx_ts_int_active {
			ts_int_active: ts_int_active {
				mux {
					pins = "gpio88";
					function = "gpio";
				};

				config {
					pins = "gpio88";
					drive-strength = <8>;
					bias-pull-up;
				};
			};
		};

		pmx_ts_int_suspend {
			ts_int_suspend: ts_int_suspend {
				mux {
					pins = "gpio88";
					function = "gpio";
				};

				config {
					pins = "gpio88";
					drive-strength = <2>;
					bias-pull-down;
				};
			};
		};

		pmx_ts_reset_active {
			ts_reset_active: ts_reset_active {
				mux {
					pins = "gpio87";
					function = "gpio";
				};

				config {
					pins = "gpio87";
					drive-strength = <8>;
					bias-pull-up;
				};
			};
		};

		pmx_ts_reset_suspend {
			ts_reset_suspend: ts_reset_suspend {
				mux {
					pins = "gpio87";
					function = "gpio";
				};

				config {
					pins = "gpio87";
					drive-strength = <2>;
					bias-pull-down;
				};
			};
		};

		pmx_ts_release {
			ts_release: ts_release {
				mux {
					pins = "gpio88", "gpio87";
					function = "gpio";
				};

				config {
					pins = "gpio88", "gpio87";
					drive-strength = <2>;
					bias-pull-down;
				};
			};
		};
		cci0_active: cci0_active {
			mux {
				/* CLK, DATA */
				pins = "gpio37", "gpio38";
				function = "cci_i2c";
			};

			config {
				pins = "gpio37", "gpio38";
				bias-pull-up; /* PULL UP*/
				drive-strength = <2>; /* 2 MA */
			};
		};

		cci0_suspend: cci0_suspend {
			mux {
				/* CLK, DATA */
				pins = "gpio37", "gpio38";
				function = "cci_i2c";
			};

			config {
				pins = "gpio37", "gpio38";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cci1_active: cci1_active {
			mux {
				/* CLK, DATA */
				pins = "gpio39", "gpio40";
				function = "cci_i2c";
			};

			config {
				pins = "gpio39", "gpio40";
				bias-pull-up; /* PULL UP*/
				drive-strength = <2>; /* 2 MA */
			};
		};

		cci1_suspend: cci1_suspend {
			mux {
				/* CLK, DATA */
				pins = "gpio39", "gpio40";
				function = "cci_i2c";
			};

			config {
				pins = "gpio39", "gpio40";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk0_active: cam_sensor_mclk0_active {
			/* MCLK0 */
			mux {
				pins = "gpio34";
				function = "cam_mclk";
			};

			config {
				pins = "gpio34";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
			/* MCLK0 */
			mux {
				pins = "gpio34";
				function = "cam_mclk";
			};

			config {
				pins = "gpio34";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_rear_active: cam_sensor_rear_active {
			/* RESET */
			mux {
				pins = "gpio48";
				function = "gpio";
			};

			config {
				pins = "gpio48";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_rear_suspend: cam_sensor_rear_suspend {
			/* RESET */
			mux {
				pins = "gpio48";
				function = "gpio";
			};

			config {
				pins = "gpio48";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
				output-low;
			};
		};

		cam_sensor_front_active: cam_sensor_front_active {
			/* RESET  */
			mux {
				pins = "gpio42";
				function = "gpio";
			};

			config {
				pins = "gpio42";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_front_suspend: cam_sensor_front_suspend {
			/* RESET */
			mux {
				pins = "gpio42";
				function = "gpio";
			};

			config {
				pins = "gpio42";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
				output-low;
			};
		};

		cam_sensor_rear2_active: cam_sensor_rear2_active {
			/* RESET */
			mux {
				pins = "gpio46";
				function = "gpio";
			};

			config {
				pins = "gpio46";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_rear2_suspend: cam_sensor_rear2_suspend {
			/* RESET */
			mux {
				pins = "gpio46";
				function = "gpio";
			};

			config {
				pins = "gpio46";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
				output-low;
			};
		};

		cam_sensor_mclk1_active: cam_sensor_mclk1_active {
			/* MCLK1 */
			mux {
				pins = "gpio35";
				function = "cam_mclk";
			};

			config {
				pins = "gpio35";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
			/* MCLK1 */
			mux {
				pins = "gpio35";
				function = "cam_mclk";
			};

			config {
				pins = "gpio35";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk2_active: cam_sensor_mclk2_active {
			/* MCLK2 */
			mux {
				pins = "gpio36";
				function = "cam_mclk";
			};

			config {
				pins = "gpio36";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
			/* MCLK2 */
			mux {
				pins = "gpio36";
				function = "cam_mclk";
			};

			config {
				pins = "gpio36";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		fpc_reset_int: fpc_reset_int {
			fpc_reset_low: reset_low {
				mux {
					pins = "gpio93";
					function = "gpio";
				};
				config {
					pins = "gpio93";
					drive-strength = <2>;
					bias-disable;
					output-low;
				};
			};

			fpc_reset_high: reset_high {
				mux {
					pins = "gpio93";
					function = "gpio";
				};
				config {
					pins = "gpio93";
					drive-strength = <2>;
					bias-disable;
					output-high;
				};
			};

			fpc_int_low: int_low {
				mux {
					pins = "gpio92";
					function = "gpio";
				};
				config {
					pins = "gpio92";
					drive-strength = <2>;
					bias-pull-down;
					input-enable;
				};
			};
		};
	};
};

&pm6125_gpios {
	tasha_mclk {
		tasha_mclk_default: tasha_mclk_default{
			pins = "gpio1";
			function = "func1";
			qcom,drive-strength = <2>;
			power-source = <0>;
			bias-disable;
			output-low;
		};
	};
};