/* Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/dts-v1/;
/plugin/;

#include <dt-bindings/clock/qcom,gcc-sm8150.h>
#include <dt-bindings/clock/qcom,camcc-sm8150.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>

#include "sm8150-hdk.dtsi"

/ {
	model = "HDK";
	compatible = "qcom,sm8150-hdk", "qcom,sm8150", "qcom,hdk";
	qcom,board-id = <0x1f 0x0>;
};

&dsi_dual_nt36850_truly_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <4095>;
	qcom,mdss-dsi-mode-sel-gpio-state = "dual_port";
	qcom,platform-te-gpio = <&tlmm 8 0>;
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&pm8150l_wled {
	qcom,string-cfg= <7>;
	qcom,leds-per-string = <6>;
	status = "ok";
};

&pm8150l_lcdb {
	status = "ok";
};

&dsi_sw43404_amoled_cmd_display {
	/delete-property/ qcom,dsi-display-active;
};

&dsi_dual_nt36850_truly_cmd_display {
	/delete-property/ qcom,dsi-display-active;
};

&qupv3_se9_i2c {
	#address-cells = <1>;
	#size-cells = <0>;

	status = "ok";
	lt9611: lt,lt9611@3b {
		compatible = "lt,lt9611";
		reg = <0x3b>;
		interrupt-parent = <&tlmm>;
		interrupts = <63 0>;
		interrupt-names = "lt_irq";
		lt,irq-gpio = <&tlmm 9 0x0>;
		lt,reset-gpio = <&tlmm 7 0x0>;
		instance_id = <0>;
		lt,non-pluggable;

		lt,preferred-mode = "1920x1080";

		lt,customize-modes {
			lt,customize-mode-id@0 {
				lt,mode-h-active = <1920>;
				lt,mode-h-front-porch = <88>;
				lt,mode-h-pulse-width = <44>;
				lt,mode-h-back-porch = <148>;
				lt,mode-h-active-high;
				lt,mode-v-active = <1080>;
				lt,mode-v-front-porch = <4>;
				lt,mode-v-pulse-width = <5>;
				lt,mode-v-back-porch = <36>;
				lt,mode-v-active-high;
				lt,mode-refresh-rate = <60>;
				lt,mode-clock-in-khz = <148500>;
			};
		};

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				lt9611_in: endpoint {
					remote-endpoint = <&ext_dsi_out>;
				};
			};
		};
	};
};

#include "dsi-panel-ext-bridge-hdmi-1080p.dtsi"

&dsi_ext_bridge_hdmi_1080p {
	qcom,mdss-dsi-ext-bridge = <0>;
};

&soc {
	ext_dsi_bridge_display: qcom,dsi-display@50 {
		label = "ext_dsi_bridge_display hdmi 1080p";
		qcom,display-type = "primary";
		qcom,dsi-display-active;

		qcom,dsi-ctrl-num = <0>;
		qcom,dsi-phy-num = <0>;
		qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";

		qcom,dsi-panel = <&dsi_ext_bridge_hdmi_1080p>;
	};
};

&sde_dsi {
	lab-supply = <&lcdb_ldo_vreg>;
	ibb-supply = <&lcdb_ncp_vreg>;
	qcom,dsi-display-list = <&ext_dsi_bridge_display
				  &dsi_dual_nt36850_truly_cmd_display>;

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;
			ext_dsi_out: endpoint {
				remote-endpoint = <&lt9611_in>;
			};
		};
	};
};