/* Copyright (c) 2017-2020, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "sm8150-pmic-overlay.dtsi"
#include "sm8150-sde-display.dtsi"
#include "sm8150-camera-sensor-cdp.dtsi"
#include "sm8150-thermal-overlay.dtsi"

&qupv3_se12_2uart {
	status = "ok";
};

&vendor {
	bluetooth: bt_wcn3990 {
		compatible = "qca,wcn3990";
		qca,bt-vdd-core-supply = <&pm8150_l7>;
		qca,bt-vdd-pa-supply = <&pm8150l_l2>;
		qca,bt-vdd-ldo-supply = <&pm8150l_l11>;

		qca,bt-vdd-core-voltage-level = <1800000 1800000>;
		qca,bt-vdd-pa-voltage-level = <1304000 1304000>;
		qca,bt-vdd-ldo-voltage-level = <3312000 3312000>;

		qca,bt-vdd-core-current-level = <0>; /* LPM/PFM */
		qca,bt-vdd-pa-current-level = <0>; /* LPM/PFM */
		qca,bt-vdd-ldo-current-level = <0>; /* LPM/PFM */
	};

	extcon_usb1: extcon_usb1 {
		compatible = "linux,extcon-usb-gpio";
		vbus-gpio = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
		id-gpio = <&tlmm 101 GPIO_ACTIVE_HIGH>;
		vbus-out-gpio = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";
		pinctrl-0 = <&usb2_vbus_det_default
			     &usb2_id_det_default
			     &usb2_vbus_boost_default>;
	};
};

&qupv3_se13_4uart {
	status = "ok";
};

&qupv3_se3_spi {
	status = "ok";
};

&qupv3_se4_i2c {
	status = "ok";
};

&soc {
	gpio_keys {
		compatible = "gpio-keys";
		label = "gpio-keys";

		pinctrl-names = "default";
		pinctrl-0 = <&key_home_default
			     &key_vol_up_default>;

		home {
			label = "home";
			gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <KEY_HOME>;
			gpio-key,wakeup;
			debounce-interval = <15>;
			linux,can-disable;
		};

		vol_up {
			label = "volume_up";
			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <KEY_VOLUMEUP>;
			gpio-key,wakeup;
			debounce-interval = <15>;
			linux,can-disable;
		};
	};

	qcom,qbt1000 {
		compatible = "qcom,qbt1000";
		clock-names = "core", "iface";
		clock-frequency = <25000000>;
		qcom,ipc-gpio = <&tlmm 118 0>;
		qcom,finger-detect-gpio = <&pm8150_gpios 1 0>;
		status = "disabled";
	};
};

&dsi_panel_pwr_supply_vdd_no_labibb {
	qcom,panel-supply-entry@1 {
		qcom,supply-min-voltage = <1800000>;
		qcom,supply-max-voltage = <1800000>;
	};
};

&dsi_sharp_4k_dsc_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <4095>;
	qcom,mdss-dsi-mode-sel-gpio-state = "dual_port";
	qcom,panel-mode-gpio = <&tlmm 7 0>;
	qcom,platform-te-gpio = <&tlmm 8 0>;
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_sharp_4k_dsc_video {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <4095>;
	qcom,mdss-dsi-mode-sel-gpio-state = "dual_port";
	qcom,panel-mode-gpio = <&tlmm 7 0>;
	qcom,platform-te-gpio = <&tlmm 8 0>;
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_sim_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_sim_vid {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_dual_sim_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_dual_sim_vid {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_dual_nt35597_truly_video {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <4095>;
	qcom,mdss-dsi-mode-sel-gpio-state = "dual_port";
	qcom,panel-mode-gpio = <&tlmm 7 0>;
	qcom,platform-te-gpio = <&tlmm 8 0>;
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_dual_nt35597_truly_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <4095>;
	qcom,mdss-dsi-mode-sel-gpio-state = "dual_port";
	qcom,panel-mode-gpio = <&tlmm 7 0>;
	qcom,platform-te-gpio = <&tlmm 8 0>;
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_sim_dsc_375_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_dual_sim_dsc_375_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_nt35597_truly_dsc_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <4095>;
	qcom,mdss-dsi-mode-sel-gpio-state = "single_port";
	qcom,panel-mode-gpio = <&tlmm 7 0>;
	qcom,platform-te-gpio = <&tlmm 8 0>;
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_nt35597_truly_dsc_video {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <4095>;
	qcom,mdss-dsi-mode-sel-gpio-state = "single_port";
	qcom,panel-mode-gpio = <&tlmm 7 0>;
	qcom,platform-te-gpio = <&tlmm 8 0>;
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_sharp_1080_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <4095>;
	qcom,mdss-dsi-mode-sel-gpio-state = "dual_port";
	qcom,panel-mode-gpio = <&tlmm 7 0>;
	qcom,platform-te-gpio = <&tlmm 8 0>;
	qcom,platform-reset-gpio = <&tlmm 6 0>;
};

&dsi_nt35695b_truly_fhd_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply_vdd_no_labibb>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,mdss-dsi-sec-bl-pmic-control-type = "bl_ctrl_external";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <4095>;
	qcom,mdss-dsi-mode-sel-gpio-state = "single_port";
	qcom,panel-mode-gpio = <&tlmm 7 0>;
	qcom,platform-reset-gpio = <&tlmm 6 0>;
	qcom,panel-sec-mode-gpio = <&tlmm 77 0>;
	qcom,platform-sec-reset-gpio = <&tlmm 66 0>;
};

&dsi_sim_sec_hd_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply_vdd_no_labibb>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,mdss-dsi-sec-bl-pmic-control-type = "bl_ctrl_external";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <4095>;
	qcom,mdss-dsi-mode-sel-gpio-state = "single_port";
	qcom,panel-mode-gpio = <&tlmm 7 0>;
	qcom,platform-reset-gpio = <&tlmm 6 0>;
	qcom,panel-sec-mode-gpio = <&tlmm 77 0>;
	qcom,platform-sec-reset-gpio = <&tlmm 66 0>;
};

&dsi_nt35695b_truly_fhd_video {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
	qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply_vdd_no_labibb>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
	qcom,mdss-dsi-sec-bl-pmic-control-type = "bl_ctrl_external";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <4095>;
	qcom,mdss-dsi-mode-sel-gpio-state = "single_port";
	qcom,panel-mode-gpio = <&tlmm 7 0>;
	qcom,platform-reset-gpio = <&tlmm 6 0>;
	qcom,panel-sec-mode-gpio = <&tlmm 77 0>;
	qcom,platform-sec-reset-gpio = <&tlmm 66 0>;
};

&qupv3_se9_i2c {
	status = "ok";

	#address-cells = <1>;
	#size-cells = <0>;

	nq@28 {
		compatible = "qcom,nq-nci";
		reg = <0x28>;
		qcom,nq-irq = <&tlmm 47 0x00>;
		qcom,nq-ven = <&tlmm 41 0x00>;
		qcom,nq-firm = <&tlmm 48 0x00>;
		qcom,nq-clkreq = <&tlmm 113 0x00>;
		qcom,nq-esepwr = <&tlmm 42 0x00>;
		interrupt-parent = <&tlmm>;
		interrupts = <47 0>;
		interrupt-names = "nfc_irq";
		pinctrl-names = "nfc_active", "nfc_suspend";
		pinctrl-0 = <&nfc_int_active &nfc_enable_active
					&nfc_clk_req_active>;
		pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend
					&nfc_clk_req_suspend>;
	};
};

&ufsphy_mem {
	compatible = "qcom,ufs-phy-qmp-v4";

	vdda-phy-supply = <&pm8150_l5>;
	vdda-phy-always-on;
	vdda-pll-supply = <&pm8150l_l3>;
	vdda-phy-max-microamp = <90200>;
	vdda-pll-max-microamp = <19000>;

	status = "ok";
};

&ufshc_mem {
	vdd-hba-supply = <&ufs_phy_gdsc>;
	vdd-hba-fixed-regulator;
	vcc-supply = <&pm8150_l10>;
	vcc-voltage-level = <2504000 2950000>;
	vcc-low-voltage-sup;
	vccq-supply = <&pm8150_l9>;
	vccq2-supply = <&pm8150_s4>;
	vcc-max-microamp = <750000>;
	vccq-max-microamp = <700000>;
	vccq2-max-microamp = <750000>;

	qcom,vddp-ref-clk-supply = <&pm8150_l9>;
	qcom,vddp-ref-clk-max-microamp = <100>;
	qcom,vccq-parent-supply = <&pm8150l_s8>;
	qcom,vccq-parent-max-microamp = <210000>;

	status = "ok";
};

&sdhc_2 {
	vdd-supply = <&pm8150l_l9>;
	qcom,vdd-voltage-level = <2950000 2960000>;
	qcom,vdd-current-level = <200 800000>;

	vdd-io-supply = <&pm8150l_l6>;
	qcom,vdd-io-voltage-level = <1808000 2960000>;
	qcom,vdd-io-current-level = <200 22000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc2_clk_on  &sdc2_cmd_on &sdc2_data_on &storage_cd>;
	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &storage_cd>;

	cd-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;

	status = "ok";
};

&spmi_debug_bus {
	status = "ok";
};

&pm8150l_wled {
	qcom,string-cfg= <7>;
	qcom,leds-per-string = <6>;
	status = "ok";
};

&pm8150l_lcdb {
	status = "ok";
};

&pm8150b_charger {
	qcom,batteryless-platform;
	io-channels = <&pm8150b_vadc ADC_USB_IN_V_16>,
		      <&pm8150b_vadc ADC_USB_IN_I>,
		      <&pm8150b_vadc ADC_CHG_TEMP>;
	io-channel-names = "usb_in_voltage",
			   "usb_in_current",
			   "chg_temp";
};

&pm8150b_vadc {
	vph_pwr {
		reg = <ADC_VPH_PWR>;
		label = "vph_pwr";
		qcom,pre-scaling = <1 3>;
	};

	wp_therm {
		reg = <ADC_AMUX_THM1_PU2>;
		label = "wp_therm";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};

	vcoin {
		reg = <ADC_VCOIN>;
		label = "vcoin";
		qcom,pre-scaling = <1 3>;
	};

	conn_therm {
		reg = <ADC_AMUX_THM3_PU2>;
		label = "conn_therm";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};

	chg_sbux {
		reg = <ADC_SBUx>;
		label = "chg_sbux";
		qcom,pre-scaling = <1 3>;
	};

	mid_chg_div6 {
		reg = <ADC_MID_CHG_DIV6>;
		label = "chg_mid";
		qcom,pre-scaling = <1 6>;
	};

	usb_in_i_uv {
		reg = <ADC_USB_IN_I>;
		label = "usb_in_i_uv";
		qcom,pre-scaling = <1 1>;
	};

	usb_in_v_div_16 {
		reg = <ADC_USB_IN_V_16>;
		label = "usb_in_v_div_16";
		qcom,pre-scaling = <1 16>;
	};
};

&pm8150_vadc {
	vph_pwr {
		reg = <ADC_VPH_PWR>;
		label = "vph_pwr";
		qcom,pre-scaling = <1 3>;
	};

	vcoin {
		reg = <ADC_VCOIN>;
		label = "vcoin";
		qcom,pre-scaling = <1 3>;
	};

	xo_therm {
		reg = <ADC_XO_THERM_PU2>;
		label = "xo_therm";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};

	skin_therm {
		reg = <ADC_AMUX_THM1_PU2>;
		label = "skin_therm";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};

	pa_therm1 {
		reg = <ADC_AMUX_THM2_PU2>;
		label = "pa_therm1";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};
};

&pm8150l_vadc {
	vph_pwr {
		reg = <ADC_VPH_PWR>;
		label = "vph_pwr";
		qcom,pre-scaling = <1 3>;
	};

	camera_flash_therm {
		reg = <ADC_AMUX_THM1_PU2>;
		label = "camera_flash_therm";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};

	skin_msm_therm {
		reg = <ADC_AMUX_THM2_PU2>;
		label = "skin_msm_therm";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};

	pa_therm2 {
		reg = <ADC_AMUX_THM3_PU2>;
		label = "pa_therm2";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};
};

&wil6210 {
	status = "ok";
};

&mhi_0 {
	mhi,fw-name = "debug.mbn";
};

&pm8150b_adc_tm {
	wp_therm {
		reg = <ADC_AMUX_THM1_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};
};

&pm8150_adc_tm {
	xo_therm {
		reg = <ADC_XO_THERM_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};

	skin_therm {
		reg = <ADC_AMUX_THM1_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};

	pa_therm1 {
		reg = <ADC_AMUX_THM2_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};
};

&pm8150l_adc_tm {
	camera_flash_therm {
		reg = <ADC_AMUX_THM1_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};

	skin_msm_therm {
		reg = <ADC_AMUX_THM2_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};

	pa_therm2 {
		reg = <ADC_AMUX_THM3_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};
};

&thermal_zones {
	wp-therm {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pm8150b_adc_tm ADC_AMUX_THM1_PU2>;
		wake-capable-sensor;
		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	xo-therm {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pm8150_adc_tm ADC_XO_THERM_PU2>;
		wake-capable-sensor;
		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	skin-therm {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pm8150_adc_tm ADC_AMUX_THM1_PU2>;
		wake-capable-sensor;
		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	pa-therm1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pm8150_adc_tm ADC_AMUX_THM2_PU2>;
		wake-capable-sensor;
		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	camera-flash-therm {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pm8150l_adc_tm ADC_AMUX_THM1_PU2>;
		wake-capable-sensor;
		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	skin-msm-therm {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pm8150l_adc_tm ADC_AMUX_THM2_PU2>;
		wake-capable-sensor;
		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	pa-therm2 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pm8150l_adc_tm ADC_AMUX_THM3_PU2>;
		wake-capable-sensor;
		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};
};

&usb1 {
	extcon = <&extcon_usb1>;
	status = "ok";
};

&usb2_phy1 {
	status = "ok";
};

&usb_qmp_phy {
	status = "ok";
};