/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "sa8155-pmic-overlay.dtsi"
#include "sa8155-cnss.dtsi"

&qupv3_3 {
	status = "ok";
};

&qupv3_se0_spi {
	status = "ok";

	#address-cells = <1>;
	#size-cells = <0>;

	can-controller@0 {
		compatible = "qcom,nxp,mpc5746c";
		reg = <0>;
		interrupt-parent = <&tlmm>;
		interrupts = <38 0>;
		spi-max-frequency = <5000000>;
		qcom,clk-freq-mhz = <40000000>;
		qcom,max-can-channels = <1>;
		qcom,bits-per-word = <8>;
		qcom,support-can-fd;
	};
};

&qupv3_se12_2uart {
	status = "ok";
};

&qupv3_se13_4uart {
	status = "ok";
};

&qupv3_se3_spi {
	status = "disabled";
};

&qupv3_se4_i2c {
	status = "ok";
};

&qupv3_se4_2uart {
	status = "ok";
};

&qupv3_se10_i2c {
	#address-cells = <1>;
	#size-cells = <0>;

	status = "ok";
	asm330@6a {
		compatible = "st,asm330lhh";
		reg = <0x6a>;
		vio-supply = <&pm8150_2_l7>;
		vdd-supply = <&pm8150_2_l16>;
		interrupt-parent = <&tlmm>;
		interrupts = <12 IRQ_TYPE_EDGE_RISING>;
		pinctrl-names = "default";
		pinctrl-0 = <&sensor_int1_default
			&sensor_int2_default>;
	};
};

&pil_modem {
	status = "disabled";
};

&soc {
	qcom,lpass@17300000 {
		status = "ok";
	};

	qcom,ssc@5c00000 {
		status = "disabled";
	};

	qcom,glink {
		modem {
			status = "disabled";
		};
	};

	ss5_pwr_ctrl0 {
		compatible = "gnss_sirf";
		pinctrl-0 = <&ss5_pwr_ctrl_rst_on>;
		ssVreset-gpio = <&tlmm 11 1>;
		ssVonoff-gpio = <&tlmm 39 1>;
	};

	qcom,turing@8300000 {
		status = "ok";
	};

	qcom,venus@aae0000 {
		status = "ok";
	};

	qcom,spss@1880000 {
		status = "ok";
	};

	qcom,npu@0x9800000 {
		status = "ok";
	};

	qcom,rmnet-ipa {
		status = "disabled";
	};

	qcom,ipa_fws {
		status = "disabled";
	};

	qcom,msm-cdsp-loader {
		status = "ok";
	};

	ssc_sensors: qcom,msm-ssc-sensors {
		status = "disabled";
	};

	ipa_hw: qcom,ipa@1e00000 {
		status = "disabled";
	};

	gpio_keys {
		compatible = "gpio-keys";
		label = "gpio-keys";

		pinctrl-names = "default";
		pinctrl-0 = <&key_home_default
			     &key_vol_up_default>;

		home {
			label = "home";
			gpios = <&pm8150_1_gpios 1 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <KEY_HOME>;
			gpio-key,wakeup;
			debounce-interval = <15>;
			linux,can-disable;
		};

		vol_up {
			label = "volume_up";
			gpios = <&pm8150_1_gpios 6 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <KEY_VOLUMEUP>;
			gpio-key,wakeup;
			debounce-interval = <15>;
			linux,can-disable;
		};
	};
};

&ufsphy_mem {
	compatible = "qcom,ufs-phy-qmp-v4";

	vdda-pll-supply = <&pm8150_2_l8>;
	vdda-phy-max-microamp = <87100>;
	vdda-pll-max-microamp = <18300>;

	status = "ok";
};

&ufshc_mem {
	vdd-hba-supply = <&ufs_phy_gdsc>;
	vdd-hba-fixed-regulator;
	vcc-supply = <&pm8150_1_l10>;
	vcc-voltage-level = <2950000 2960000>;
	vccq2-supply = <&pm8150_1_s4>;
	vcc-max-microamp = <750000>;
	vccq2-max-microamp = <750000>;

	qcom,vddp-ref-clk-supply = <&pm8150_2_l5>;
	qcom,vddp-ref-clk-max-microamp = <100>;

	status = "ok";
};

&sdhc_2 {
	vdd-supply = <&pm8150_1_l17>;
	qcom,vdd-voltage-level = <2950000 2960000>;
	qcom,vdd-current-level = <200 800000>;

	vdd-io-supply = <&pm8150_2_l13>;
	qcom,vdd-io-voltage-level = <1808000 2960000>;
	qcom,vdd-io-current-level = <200 22000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc2_clk_on
		&sdc2_cmd_on &sdc2_data_on &storage_cd_default>;
	pinctrl-1 = <&sdc2_clk_off
		&sdc2_cmd_off &sdc2_data_off &storage_cd_default>;

	cd-gpios = <&pm8150_1_gpios 4 GPIO_ACTIVE_LOW>;

	status = "ok";
};

&usb0 {
	qcom,default-mode-none;
	qcom,ignore-wakeup-src-in-hostmode;
	dwc3@a600000 {
		usb-phy = <&usb2_phy0>, <&usb_nop_phy>;
		maximum-speed = "high-speed";
	};
};

&usb2_phy0 {
	qcom,param-override-seq =
		<0x43 0x70
		 0x01 0xb0>;
	pinctrl-names = "default";
	pinctrl-0 = <&usb2phy_ac_en1_default>;
};

&usb_qmp_dp_phy {
	status = "disabled";
};

&usb1 {
	status = "ok";
	qcom,default-mode-host;
	qcom,ignore-wakeup-src-in-hostmode;
};

&usb2_phy1 {
	qcom,param-override-seq = <0x01 0xb0>;
	pinctrl-names = "default";
	pinctrl-0 = <&usb2phy_ac_en2_default>;
};

&shared_meta {
	parts = "vbmeta,boot,system,vendor,dtbo";
};

&pcie_rc1 {
	aqc_rc1: aquantia,aqc107@pcie_rc1 {
		reg = <0 0 0 0 0>;
		compatible = "aquantia,aqc-107";
		pci-ids =
			"1d6a:0001",
			"1d6a:d107",
			"1d6a:07b1",
			"1d6a:87b1",
			"1d6a:d108",
			"1d6a:08b1",
			"1d6a:88b1",
			"1d6a:d109",
			"1d6a:09b1",
			"1d6a:89b1",
			"1d6a:d100",
			"1d6a:00b1",
			"1d6a:80b1",
			"1d6a:11b1",
			"1d6a:91b1",
			"1d6a:51b1",
			"1d6a:12b1",
			"1d6a:92b1",
			"1d6a:52b1";

		qcom,smmu;
		qcom,smmu-iova-base = /bits/ 64 <0x20000000>;
		qcom,smmu-iova-size = /bits/ 64 <0x40000000>;

		qcom,smmu-attr-atomic;
		qcom,smmu-attr-s1-bypass;
	};
};

&pcie1 {
	qcom,boot-option = <0x0>;
};

&pcie_rc1 {
	nvme_x8: qcom,nvme@pcie_rc1 {
		reg = <0 0 0 0 0>;
		compatible = "qcom,nvme";
		pci-ids =
			"8086:0953",
			"8086:0a54",
			"8086:0a55",
			"8086:f1a5",
			"8086:f1a5",
			"1c58:0003",
			"1c58:0023",
			"1c5c:1327",
			"1c5f:0540",
			"144d:a821",
			"144d:a822",
			"144d:a808",
			"1d1d:1f1f",
			"1d1d:2807",
			"1d1d:2601",
			"106b:2001",
			"106b:2003",
			"1179:0115",
			"1179:0116";

		qcom,smmu;
		qcom,smmu-iova-base = /bits/ 64 <0x20000000>;
		qcom,smmu-iova-size = /bits/ 64 <0x40000000>;

		qcom,smmu-attr-atomic;
		qcom,smmu-attr-s1-bypass;
	};
};