/* Copyright (c) 2020, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/dts-v1/;

#include "sa2150p-ccard.dtsi"

/ {
	model = "Qualcomm Technologies, Inc. SA2150P CCARD NAND DC";
	compatible = "qcom,sa2150p-ccard", "qcom,qcs405", "qcom,sa2150p",
				"qcom,ccard";
	qcom,board-id = <25 2>, <25 0x102>;

	cpus {
		/delete-node/ cpu@102;
		/delete-node/ cpu@103;

		cpu-map {
			cluster0 {
				/delete-node/ core2;
				/delete-node/ core3;
			};
		};
	};
};

&soc {
	cpuss_dump {
		/delete-node/ qcom,l1_i_cache102;
		/delete-node/ qcom,l1_i_cache103;
		/delete-node/ qcom,l1_d_cache102;
		/delete-node/ qcom,l1_d_cache103;
	};

	qcom,spm@b012000 {
		qcom,cpu-vctl-list = <&CPU0 &CPU1>;
	};

	qcom,lpm-levels {
		qcom,pm-cluster@0{
			qcom,pm-cpu {
				qcom,cpu = <&CPU0 &CPU1>;
			};
		};
	};

	/delete-node/ cti@61ba000;
	/delete-node/ cti@61bb000;
	/delete-node/ etm@61be000;
	/delete-node/ etm@61bf000;

	funnel@61a1000 {
		ports {
			/delete-node/ port@3;
			/delete-node/ port@4;
		};
	};

	/delete-node/ qcom,cpu0-computemon;

	cpu0_computemon: qcom,cpu0-computemon {
		compatible = "qcom,arm-cpu-mon";
		qcom,cpulist = <&CPU0 &CPU1>;
		qcom,target-dev = <&cpu0_cpu_ddr_latfloor>;
		qcom,core-dev-table =
			< 1094400 MHZ_TO_MBPS( 297, 8) >,
			< 1248000 MHZ_TO_MBPS( 597, 8) >,
			< 1401600 MHZ_TO_MBPS( 710, 8) >;
	};
};

&thermal_zones {
	cpuss-max-step {
		cooling-maps {
			/delete-node/ cpu2_cdev;
			/delete-node/ cpu3_cdev;
		};
	};
	/delete-node/ cpuss-2-step;
	/delete-node/ cpuss-3-step;
};

&qnand_1 {
	status = "okay";
};

&sdhc_1 {
	status = "disabled";
};

&blsp1_uart1_hs {
	status = "ok";
};

&blsp1_uart4_hs {
	status = "disabled";
};

&wlan_fw_mem {
	reg = <0x0 0x86400000 0x0 0x100000>;
};

&reserved_mem {
	linux,cma {
		size = <0 0x400000>;
	};
};

&qseecom_mem {
	size = <0 0x400000>;
};

&soc {
	/delete-node/ qcom,wlan_dsp@7000000;
	/delete-node/ qcom,icnss@18800000;
};

&reserved_mem {
	/delete-node/ wlan_msa_region@88E0000;
	/delete-node/ wlan_fw_mem@86400000;
};

&tlmm {
	sdx_ext_ipc_gpio_default: sdx_ext_ipc_gpio_default {
		mux {
			pins = "gpio77";
			function = "gpio";
		};

		config {
			pins = "gpio77";
			drive-strength = <2>;
			bias-pull-down;
		};
	};
};

&sdx_ext_ipc {
	qcom,wakeup-gpio-out = <&tlmm 77 0x00>;
};

&ethqos_hw {
	rxc-skew-ps = <720>;
	io-macro-info {
		rx-prog-swap;
		rx-dll-bypass;
	};
};

&tlmm {
	/delete-node/ mdss_hdmi_ddc_active;
	/delete-node/ mdss_hdmi_ddc_suspend;
	rgmii_level_shifter: rgmii_level_shifter {
		mux {
			pins = "gpio16";
			function = "gpio";
		};
		config {
			pins = "gpio16";
			drive-strength = <2>;
			bias-pull-down;
			output-low;
		};
	};
};

&ethqos_hw {
	pinctrl-names = "dev-emac-mdc", "dev-emac-mdio",
		"dev-emac-rgmii_txd0_state", "dev-emac-rgmii_txd1_state",
		"dev-emac-rgmii_txd2_state", "dev-emac-rgmii_txd3_state",
		"dev-emac-rgmii_txc_state",  "dev-emac-rgmii_tx_ctl_state",
		"dev-emac-rgmii_rxd0_state", "dev-emac-rgmii_rxd1_state",
		"dev-emac-rgmii_rxd2_state", "dev-emac-rgmii_rxd3_state",
		"dev-emac-rgmii_rxc_state", "dev-emac-rgmii_rx_ctl_state",
		"dev-emac-phy_intr", "dev-emac-phy_reset_state",
		"dev-emac-rgmii_lvl_shift_state";
	pinctrl-16 = <&rgmii_level_shifter>;
};

&gpu_bw_tbl {
	status = "disabled";
};

&gpubw {
	status = "disabled";
};

&msm_gpu {
	status = "disabled";
};

&kgsl_msm_iommu {
	status = "disabled";
};