/* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

&soc {
	tlmm: pinctrl@3400000 {
		compatible = "qcom,sdmmagpie-pinctrl";
		reg = <0x03400000 0xdc2000>, <0x17c000f0 0x60>;
		reg-names = "pinctrl", "spi_cfg";
		interrupts = <0 208 0>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;

		ufs_dev_reset_assert: ufs_dev_reset_assert {
			config {
				pins = "ufs_reset";
				bias-pull-down;		/* default: pull down */
				/*
				 * UFS_RESET driver strengths are having
				 * different values/steps compared to typical
				 * GPIO drive strengths.
				 *
				 * Following table clarifies:
				 *
				 * HDRV value | UFS_RESET | Typical GPIO
				 *   (dec)    |   (mA)    |    (mA)
				 *     0      |   0.8     |    2
				 *     1      |   1.55    |    4
				 *     2      |   2.35    |    6
				 *     3      |   3.1     |    8
				 *     4      |   3.9     |    10
				 *     5      |   4.65    |    12
				 *     6      |   5.4     |    14
				 *     7      |   6.15    |    16
				 *
				 * POR value for UFS_RESET HDRV is 3 which means
				 * 3.1mA and we want to use that. Hence just
				 * specify 8mA to "drive-strength" binding and
				 * that should result into writing 3 to HDRV
				 * field.
				 */
				drive-strength = <8>;	/* default: 3.1 mA */
				output-low; /* active low reset */
			};
		};

		ufs_dev_reset_deassert: ufs_dev_reset_deassert {
			config {
				pins = "ufs_reset";
				bias-pull-down;		/* default: pull down */
				/*
				 * default: 3.1 mA
				 * check comments under ufs_dev_reset_assert
				 */
				drive-strength = <8>;
				output-high; /* active low reset */
			};
		};

		/* QUPv3 South SE mappings */
		/* SE 0 pin mappings */
		qupv3_se0_i2c_pins: qupv3_se0_i2c_pins {
			qupv3_se0_i2c_active: qupv3_se0_i2c_active {
				mux {
					pins = "gpio49", "gpio50";
					function = "qup00";
				};

				config {
					pins = "gpio49", "gpio50";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se0_i2c_sleep: qupv3_se0_i2c_sleep {
				mux {
					pins = "gpio49", "gpio50";
					function = "gpio";
				};

				config {
					pins = "gpio49", "gpio50";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		qupv3_se0_spi_pins: qupv3_se0_spi_pins {
			qupv3_se0_spi_active: qupv3_se0_spi_active {
				mux {
					pins = "gpio49", "gpio50", "gpio51",
								"gpio52";
					function = "qup00";
				};

				config {
					pins = "gpio49", "gpio50", "gpio51",
								"gpio52";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se0_spi_sleep: qupv3_se0_spi_sleep {
				mux {
					pins = "gpio49", "gpio50", "gpio51",
								"gpio52";
					function = "gpio";
				};

				config {
					pins = "gpio49", "gpio50", "gpio51",
								"gpio52";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		/* SE 1 pin mappings */
		qupv3_se1_i2c_pins: qupv3_se1_i2c_pins {
			qupv3_se1_i2c_active: qupv3_se1_i2c_active {
				mux {
					pins = "gpio0", "gpio1";
					function = "qup01";
				};

				config {
					pins = "gpio0", "gpio1";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se1_i2c_sleep: qupv3_se1_i2c_sleep {
				mux {
					pins = "gpio0", "gpio1";
					function = "gpio";
				};

				config {
					pins = "gpio0", "gpio1";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		qupv3_se1_spi_pins: qupv3_se1_spi_pins {
			qupv3_se1_spi_active: qupv3_se1_spi_active {
				mux {
					pins = "gpio0", "gpio1", "gpio2",
								"gpio3";
					function = "qup01";
				};

				config {
					pins = "gpio0", "gpio1", "gpio2",
								"gpio3";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se1_spi_sleep: qupv3_se1_spi_sleep {
				mux {
					pins = "gpio0", "gpio1", "gpio2",
								"gpio3";
					function = "gpio";
				};

				config {
					pins = "gpio0", "gpio1", "gpio2",
								"gpio3";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		/* SE 2 pin mappings */
		qupv3_se2_i2c_pins: qupv3_se2_i2c_pins {
			qupv3_se2_i2c_active: qupv3_se2_i2c_active {
				mux {
					pins = "gpio34", "gpio35";
					function = "qup02";
				};

				config {
					pins = "gpio34", "gpio35";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se2_i2c_sleep: qupv3_se2_i2c_sleep {
				mux {
					pins = "gpio34", "gpio35";
					function = "gpio";
				};

				config {
					pins = "gpio34", "gpio35";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		nfc {
			nfc_int_active: nfc_int_active {
				/* active state */
				mux {
					/* GPIO 37 NFC Read Interrupt */
					pins = "gpio37";
					function = "gpio";
				};

				config {
					pins = "gpio37";
					drive-strength = <2>; /* 2 MA */
					bias-pull-up;
				};
			};

			nfc_int_suspend: nfc_int_suspend {
				/* sleep state */
				mux {
					/* GPIO 37 NFC Read Interrupt */
					pins = "gpio37";
					function = "gpio";
				};

				config {
					pins = "gpio37";
					drive-strength = <2>; /* 2 MA */
					bias-pull-up;
				};
			};

			nfc_enable_active: nfc_enable_active {
				/* active state */
				mux {
					/* 12: Enable 36: Firmware */
					pins = "gpio12", "gpio36";
					function = "gpio";
				};

				config {
					pins = "gpio12", "gpio36";
					drive-strength = <2>; /* 2 MA */
					bias-pull-up;
				};
			};

			nfc_enable_suspend: nfc_enable_suspend {
				/* sleep state */
				mux {
					/* 12: Enable 36: Firmware */
					pins = "gpio12", "gpio36";
					function = "gpio";
				};

				config {
					pins = "gpio12", "gpio36";
					drive-strength = <2>; /* 2 MA */
					bias-disable;
				};
			};

			nfc_clk_req_active: nfc_clk_req_active {
				/* active state */
				mux {
					/* GPIO 31: NFC CLOCK REQUEST */
					pins = "gpio31";
					function = "gpio";
				};

				config {
					pins = "gpio31";
					drive-strength = <2>; /* 2 MA */
					bias-pull-up;
				};
			};

			nfc_clk_req_suspend: nfc_clk_req_suspend {
				/* sleep state */
				mux {
					/* GPIO 31: NFC CLOCK REQUEST */
					pins = "gpio31";
					function = "gpio";
				};

				config {
					pins = "gpio31";
					drive-strength = <2>; /* 2 MA */
					bias-disable;
				};
			};
		};

		/* SE 3 pin mappings */
		qupv3_se3_i2c_pins: qupv3_se3_i2c_pins {
			qupv3_se3_i2c_active: qupv3_se3_i2c_active {
				mux {
					pins = "gpio38", "gpio39";
					function = "qup03";
				};

				config {
					pins = "gpio38", "gpio39";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se3_i2c_sleep: qupv3_se3_i2c_sleep {
				mux {
					pins = "gpio38", "gpio39";
					function = "gpio";
				};

				config {
					pins = "gpio38", "gpio39";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		qupv3_se3_4uart_pins: qupv3_se3_4uart_pins {
			qupv3_se3_ctsrx: qupv3_se3_ctsrx {
				mux {
					pins = "gpio38", "gpio41";
					function = "qup03";
				};

				config {
					pins = "gpio38", "gpio41";
					drive-strength = <2>;
					bias-no-pull;
				};
			};

			qupv3_se3_rts: qupv3_se3_rts {
				mux {
					pins = "gpio39";
					function = "qup03";
				};

				config {
					pins = "gpio39";
					drive-strength = <2>;
					bias-pull-down;
				};
			};

			qupv3_se3_tx: qupv3_se3_tx {
				mux {
					pins = "gpio40";
					function = "qup03";
				};

				config {
					pins = "gpio40";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		qupv3_se3_spi_pins: qupv3_se3_spi_pins {
			qupv3_se3_spi_active: qupv3_se3_spi_active {
				mux {
					pins = "gpio38", "gpio39", "gpio40",
								"gpio41";
					function = "qup03";
				};

				config {
					pins = "gpio38", "gpio39", "gpio40",
								"gpio41";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se3_spi_sleep: qupv3_se3_spi_sleep {
				mux {
					pins = "gpio38", "gpio39", "gpio40",
								"gpio41";
					function = "gpio";
				};

				config {
					pins = "gpio38", "gpio39", "gpio40",
								"gpio41";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		fpc_reset_int {
			fpc_reset_low: reset_low {
				mux {
					pins = "gpio91";
					function = "gpio";
				};
				config {
					pins = "gpio91";
					drive-strength = <2>;
					bias-disable;
					output-low;
				};
			};

			fpc_reset_high: reset_high {
				mux {
					pins = "gpio91";
					function = "gpio";
				};

				config {
					pins = "gpio91";
					drive-strength = <2>;
					bias-disable;
					output-high;
				};
			};

			fpc_int_low: int_low {
				mux {
					pins = "gpio90";
					function = "gpio";
				};
				config {
					pins = "gpio90";
					drive-strength = <2>;
					bias-pull-down;
					input-enable;
				};
			};
		};



		/* SE 4 pin mappings */
		qupv3_se4_i2c_pins: qupv3_se4_i2c_pins {
			qupv3_se4_i2c_active: qupv3_se4_i2c_active {
				mux {
					pins = "gpio53", "gpio54";
					function = "qup04";
				};

				config {
					pins = "gpio53", "gpio54";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se4_i2c_sleep: qupv3_se4_i2c_sleep {
				mux {
					pins = "gpio53", "gpio54";
					function = "gpio";
				};

				config {
					pins = "gpio53", "gpio54";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		qupv3_se4_4uart_pins: qupv3_se4_4uart_pins {
			qupv3_se4_ctsrx: qupv3_se4_ctsrx {
				mux {
					pins = "gpio53", "gpio56";
					function = "qup04";
				};

				config {
					pins = "gpio53", "gpio56";
					drive-strength = <2>;
					bias-no-pull;
				};
			};

			qupv3_se4_rts: qupv3_se4_rts {
				mux {
					pins = "gpio54";
					function = "qup04";
				};

				config {
					pins = "gpio54";
					drive-strength = <2>;
					bias-pull-down;
				};
			};

			qupv3_se4_tx: qupv3_se4_tx {
				mux {
					pins = "gpio55";
					function = "qup04";
				};

				config {
					pins = "gpio55";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		qupv3_se4_spi_pins: qupv3_se4_spi_pins {
			qupv3_se4_spi_active: qupv3_se4_spi_active {
				mux {
					pins = "gpio53", "gpio54", "gpio55",
								"gpio56";
					function = "qup04";
				};

				config {
					pins = "gpio53", "gpio54", "gpio55",
								"gpio56";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se4_spi_sleep: qupv3_se4_spi_sleep {
				mux {
					pins = "gpio53", "gpio54", "gpio55",
								"gpio56";
					function = "gpio";
				};

				config {
					pins = "gpio53", "gpio54", "gpio55",
								"gpio56";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		/* QUPv3 North instances */
		/* SE 6 pin mappings */
		qupv3_se6_i2c_pins: qupv3_se6_i2c_pins {
			qupv3_se6_i2c_active: qupv3_se6_i2c_active {
				mux {
					pins = "gpio59", "gpio60";
					function = "qup10";
				};

				config {
					pins = "gpio59", "gpio60";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se6_i2c_sleep: qupv3_se6_i2c_sleep {
				mux {
					pins = "gpio59", "gpio60";
					function = "gpio";
				};

				config {
					pins = "gpio59", "gpio60";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		qupv3_se6_spi_pins: qupv3_se6_spi_pins {
			qupv3_se6_spi_active: qupv3_se6_spi_active {
				mux {
					pins = "gpio59", "gpio60", "gpio61",
								"gpio62";
					function = "qup10";
				};

				config {
					pins = "gpio59", "gpio60", "gpio61",
								"gpio62";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se6_spi_sleep: qupv3_se6_spi_sleep {
				mux {
					pins = "gpio59", "gpio60", "gpio61",
								"gpio62";
					function = "gpio";
				};

				config {
					pins = "gpio59", "gpio60", "gpio61",
								"gpio62";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		/* SE 7 pin mappings */
		qupv3_se7_i2c_pins: qupv3_se7_i2c_pins {
			qupv3_se7_i2c_active: qupv3_se7_i2c_active {
				mux {
					pins = "gpio6", "gpio7";
					function = "qup11";
				};

				config {
					pins = "gpio6", "gpio7";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se7_i2c_sleep: qupv3_se7_i2c_sleep {
				mux {
					pins = "gpio6", "gpio7";
					function = "gpio";
				};

				config {
					pins = "gpio6", "gpio7";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		qupv3_se7_spi_pins: qupv3_se7_spi_pins {
			qupv3_se7_spi_active: qupv3_se7_spi_active {
				mux {
					pins = "gpio6", "gpio7", "gpio8",
								"gpio9";
					function = "qup11";
				};

				config {
					pins = "gpio6", "gpio7", "gpio8",
								"gpio9";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se7_spi_sleep: qupv3_se7_spi_sleep {
				mux {
					pins = "gpio6", "gpio7", "gpio8",
								"gpio9";
					function = "gpio";
				};

				config {
					pins = "gpio6", "gpio7", "gpio8",
								"gpio9";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		/* SE 8 pin mappings */
		qupv3_se8_i2c_pins: qupv3_se8_i2c_pins {
			qupv3_se8_i2c_active: qupv3_se8_i2c_active {
				mux {
					pins = "gpio42", "gpio43";
					function = "qup12";
				};

				config {
					pins = "gpio42", "gpio43";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se8_i2c_sleep: qupv3_se8_i2c_sleep {
				mux {
					pins = "gpio42", "gpio43";
					function = "gpio";
				};

				config {
					pins = "gpio42", "gpio43";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		qupv3_se8_2uart_pins: qupv3_se8_2uart_pins {
			qupv3_se8_2uart_active: qupv3_se8_2uart_active {
				mux {
					pins = "gpio44", "gpio45";
					function = "qup12";
				};

				config {
					pins = "gpio44", "gpio45";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se8_2uart_sleep: qupv3_se8_2uart_sleep {
				mux {
					pins = "gpio44", "gpio45";
					function = "gpio";
				};

				config {
					pins = "gpio44", "gpio45";
					drive-strength = <2>;
					bias-disable;
				};
			};
		};

		qupv3_se8_spi_pins: qupv3_se8_spi_pins {
			qupv3_se8_spi_active: qupv3_se8_spi_active {
				mux {
					pins = "gpio42", "gpio43", "gpio44",
								"gpio45";
					function = "qup12";
				};

				config {
					pins = "gpio42", "gpio43", "gpio44",
								"gpio45";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se8_spi_sleep: qupv3_se8_spi_sleep {
				mux {
					pins = "gpio42", "gpio43", "gpio44",
								"gpio45";
					function = "gpio";
				};

				config {
					pins = "gpio42", "gpio43", "gpio44",
								"gpio45";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		/* SE 9 pin mappings */
		qupv3_se9_i2c_pins: qupv3_se9_i2c_pins {
			qupv3_se9_i2c_active: qupv3_se9_i2c_active {
				mux {
					pins = "gpio46", "gpio47";
					function = "qup13";
				};

				config {
					pins = "gpio46", "gpio47";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se9_i2c_sleep: qupv3_se9_i2c_sleep {
				mux {
					pins = "gpio46", "gpio47";
					function = "gpio";
				};

				config {
					pins = "gpio6", "gpio7";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		/* SE 10 pin mappings */
		qupv3_se10_i2c_pins: qupv3_se10_i2c_pins {
			qupv3_se10_i2c_active: qupv3_se10_i2c_active {
				mux {
					pins = "gpio110", "gpio111";
					function = "qup14";
				};

				config {
					pins = "gpio110", "gpio111";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se10_i2c_sleep: qupv3_se10_i2c_sleep {
				mux {
					pins = "gpio110", "gpio111";
					function = "gpio";
				};

				config {
					pins = "gpio110", "gpio111";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		qupv3_se10_4uart_pins: qupv3_se10_4uart_pins {
			qupv3_se10_ctsrx: qupv3_se10_ctsrx {
				mux {
					pins = "gpio110", "gpio113";
					function = "qup14";
				};

				config {
					pins = "gpio110", "gpio113";
					drive-strength = <2>;
					bias-no-pull;
				};
			};

			qupv3_se10_rts: qupv3_se10_rts {
				mux {
					pins = "gpio111";
					function = "qup14";
				};

				config {
					pins = "gpio111";
					drive-strength = <2>;
					bias-pull-down;
				};
			};

			qupv3_se10_tx: qupv3_se10_tx {
				mux {
					pins = "gpio112";
					function = "qup14";
				};

				config {
					pins = "gpio112";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		qupv3_se10_spi_pins: qupv3_se10_spi_pins {
			qupv3_se10_spi_active: qupv3_se10_spi_active {
				mux {
					pins = "gpio110", "gpio111", "gpio112",
								"gpio113";
					function = "qup14";
				};

				config {
					pins = "gpio110", "gpio111", "gpio112",
								"gpio113";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se10_spi_sleep: qupv3_se10_spi_sleep {
				mux {
					pins = "gpio110", "gpio111", "gpio112",
								"gpio113";
					function = "gpio";
				};

				config {
					pins = "gpio110", "gpio111", "gpio112",
								"gpio113";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		/* SE 11 pin mappings */
		qupv3_se11_i2c_pins: qupv3_se11_i2c_pins {
			qupv3_se11_i2c_active: qupv3_se11_i2c_active {
				mux {
					pins = "gpio101", "gpio102";
					function = "qup15";
				};

				config {
					pins = "gpio101", "gpio102";
					drive-strength = <2>;
					bias-disable;
				};
			};

			qupv3_se11_i2c_sleep: qupv3_se11_i2c_sleep {
				mux {
					pins = "gpio101", "gpio102";
					function = "gpio";
				};

				config {
					pins = "gpio101", "gpio102";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		qupv3_se11_4uart_pins: qupv3_se11_4uart_pins {
			qupv3_se11_ctsrx: qupv3_se11_ctsrx {
				mux {
					pins = "gpio101", "gpio92";
					function = "qup15";
				};

				config {
					pins = "gpio101", "gpio92";
					drive-strength = <2>;
					bias-no-pull;
				};
			};

			qupv3_se11_rts: qupv3_se11_rts {
				mux {
					pins = "gpio102";
					function = "qup15";
				};

				config {
					pins = "gpio102";
					drive-strength = <2>;
					bias-pull-down;
				};
			};

			qupv3_se11_tx: qupv3_se11_tx {
				mux {
					pins = "gpio103";
					function = "qup15";
				};

				config {
					pins = "gpio103";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		qupv3_se11_spi_pins: qupv3_se11_spi_pins {
			qupv3_se11_spi_active: qupv3_se11_spi_active {
				mux {
					pins = "gpio101", "gpio102", "gpio103",
								"gpio92";
					function = "qup15";
				};

				config {
					pins = "gpio101", "gpio102", "gpio103",
								"gpio92";
					drive-strength = <6>;
					bias-disable;
				};
			};

			qupv3_se11_spi_sleep: qupv3_se11_spi_sleep {
				mux {
					pins = "gpio101", "gpio102", "gpio103",
								"gpio92";
					function = "gpio";
				};

				config {
					pins = "gpio101", "gpio102", "gpio103",
								"gpio92";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		pmx_sde_te {
			sde_te_active: sde_te_active {
				mux {
					pins = "gpio10";
					function = "mdp_vsync";
				};

				config {
					pins = "gpio10";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;         /* PULL DOWN */
				};
			};

			sde_te_suspend: sde_te_suspend {
				mux {
					pins = "gpio10";
					function = "mdp_vsync";
				};

				config {
					pins = "gpio10";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;         /* PULL DOWN */
				};
			};


			sde_te1_active: sde_te1_active {
				mux {
					pins = "gpio11";
					function = "mdp_vsync";
				};

				config {
					pins = "gpio11";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;         /* PULL DOWN */
				};
			};

			sde_te1_suspend: sde_te1_suspend {
				mux {
					pins = "gpio11";
					function = "mdp_vsync";
				};

				config {
					pins = "gpio11";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;         /* PULL DOWN */
				};
			};
		};

		sde_dp_aux_active: sde_dp_aux_active {
			mux {
				pins = "gpio42", "gpio33";
				function = "gpio";
			};

			config {
				pins = "gpio42", "gpio33";
				bias-disable = <0>; /* no pull */
				drive-strength = <8>;
			};
		};

		sde_dp_aux_suspend: sde_dp_aux_suspend {
			mux {
				pins = "gpio42", "gpio33";
				function = "gpio";
			};

			config {
				pins = "gpio42", "gpio33";
				bias-pull-down;
				drive-strength = <2>;
			};
		};

		sde_dp_usbplug_cc_active: sde_dp_usbplug_cc_active {
			mux {
				pins = "gpio104";
				function = "gpio";
			};

			config {
				pins = "gpio104";
				bias-disable;
				drive-strength = <16>;
			};
		};

		sde_dp_usbplug_cc_suspend: sde_dp_usbplug_cc_suspend {
			mux {
				pins = "gpio104";
				function = "gpio";
			};

			config {
				pins = "gpio104";
				bias-pull-down;
				drive-strength = <2>;
			};
		};

		wsa_swr_clk_pin {
			wsa_swr_clk_sleep: wsa_swr_clk_sleep {
				mux {
					pins = "gpio49";
					function = "wsa_clk";
				};

				config {
					pins = "gpio49";
					drive-strength = <2>;
					bias-bus-hold;
				};
			};

			wsa_swr_clk_active: wsa_swr_clk_active {
				mux {
					pins = "gpio49";
					function = "wsa_clk";
				};

				config {
					pins = "gpio49";
					drive-strength = <2>;
					bias-bus-hold;
				};
			};
		};

		wsa_swr_data_pin {
			wsa_swr_data_sleep: wsa_swr_data_sleep {
				mux {
					pins = "gpio50";
					function = "wsa_data";
				};

				config {
					pins = "gpio50";
					drive-strength = <4>;
					bias-bus-hold;
				};
			};

			wsa_swr_data_active: wsa_swr_data_active {
				mux {
					pins = "gpio50";
					function = "wsa_data";
				};

				config {
					pins = "gpio50";
					drive-strength = <4>;
					bias-bus-hold;
				};
			};
		};

		/* WSA speaker reset pins */
		spkr_1_sd_n {
			spkr_1_sd_n_sleep: spkr_1_sd_n_sleep {
				mux {
					pins = "gpio51";
					function = "gpio";
				};

				config {
					pins = "gpio51";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;
					input-enable;
				};
			};

			spkr_1_sd_n_active: spkr_1_sd_n_active {
				mux {
					pins = "gpio51";
					function = "gpio";
				};

				config {
					pins = "gpio51";
					drive-strength = <16>;   /* 16 mA */
					bias-disable;
					output-high;
				};
			};
		};

		spkr_2_sd_n {
			spkr_2_sd_n_sleep: spkr_2_sd_n_sleep {
				mux {
					pins = "gpio52";
					function = "gpio";
				};

				config {
					pins = "gpio52";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;
					input-enable;
				};
			};

			spkr_2_sd_n_active: spkr_2_sd_n_active {
				mux {
					pins = "gpio52";
					function = "gpio";
				};

				config {
					pins = "gpio52";
					drive-strength = <16>;   /* 16 mA */
					bias-disable;
					output-high;
				};
			};
		};

		wcd9xxx_intr {
			wcd_intr_default: wcd_intr_default{
				mux {
					pins = "gpio58";
					function = "gpio";
				};

				config {
					pins = "gpio58";
					drive-strength = <2>; /* 2 mA */
					bias-pull-down; /* pull down */
					input-enable;
				};
			};
		};

		fsa_usbc_ana_en_n@42 {
			fsa_usbc_ana_en: fsa_usbc_ana_en {
				mux {
					pins = "gpio42";
					function = "gpio";
				};

				config {
					pins = "gpio42";
					drive-strength = <2>;
					bias-disable;
					output-low;
				};
			};
		};

		cci0_active: cci0_active {
			mux {
				/* CLK, DATA */
				pins = "gpio17","gpio18"; // Only 2
				function = "cci_i2c";
			};

			config {
				pins = "gpio17","gpio18";
				bias-pull-up; /* PULL UP*/
				drive-strength = <2>; /* 2 MA */
			};
		};

		cci0_suspend: cci0_suspend {
			mux {
				/* CLK, DATA */
				pins = "gpio17","gpio18";
				function = "cci_i2c";
			};

			config {
				pins = "gpio17","gpio18";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cci1_active: cci1_active {
			mux {
				/* CLK, DATA */
				pins = "gpio19","gpio20";
				function = "cci_i2c";
			};

			config {
				pins = "gpio19","gpio20";
				bias-pull-up; /* PULL UP*/
				drive-strength = <2>; /* 2 MA */
			};
		};

		cci1_suspend: cci1_suspend {
			mux {
				/* CLK, DATA */
				pins = "gpio19","gpio20";
				function = "cci_i2c";
			};

			config {
				pins = "gpio19","gpio20";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cci2_active: cci2_active {
			mux {
				/* CLK, DATA */
				pins = "gpio27","gpio28";
				function = "cci_i2c";
			};

			config {
				pins = "gpio27","gpio28";
				bias-pull-up; /* PULL UP*/
				drive-strength = <2>; /* 2 MA */
			};
		};

		cci2_suspend: cci2_suspend {
			mux {
				/* CLK, DATA */
				pins = "gpio27","gpio28";
				function = "cci_i2c";
			};

			config {
				pins = "gpio27","gpio28";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk0_active: cam_sensor_mclk0_active {
			/* MCLK0 */
			mux {
				pins = "gpio13";
				function = "cam_mclk";
			};

			config {
				pins = "gpio13";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
			/* MCLK0 */
			mux {
				pins = "gpio13";
				function = "cam_mclk";
			};

			config {
				pins = "gpio13";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk1_active: cam_sensor_mclk1_active {
			/* MCLK1 */
			mux {
				pins = "gpio14";
				function = "cam_mclk";
			};

			config {
				pins = "gpio14";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
			/* MCLK1 */
			mux {
				pins = "gpio14";
				function = "cam_mclk";
			};

			config {
				pins = "gpio14";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk2_active: cam_sensor_mclk2_active {
			/* MCLK2 */
			mux {
				pins = "gpio15";
				function = "cam_mclk";
			};

			config {
				pins = "gpio15";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
			/* MCLK2 */
			mux {
				pins = "gpio15";
				function = "cam_mclk";
			};

			config {
				pins = "gpio15";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk3_active: cam_sensor_mclk3_active {
			/* MCLK3 */
			mux {
				pins = "gpio16";
				function = "cam_mclk";
			};

			config {
				pins = "gpio16";
				bias-disable; /* No PULL */
				drive-strength = <2>; /* 2 MA */
			};
		};

		cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
			/* MCLK3 */
			mux {
				pins = "gpio16";
				function = "cam_mclk";
			};

			config {
				pins = "gpio16";
				bias-pull-down; /* PULL DOWN */
				drive-strength = <2>; /* 2 MA */
			};
		};

		/* SDC pin type */
		sdc1_clk_on: sdc1_clk_on {
			config {
				pins = "sdc1_clk";
				bias-disable;		/* NO pull */
				drive-strength = <16>;	/* 16 MA */
			};
		};

		sdc1_clk_off: sdc1_clk_off {
			config {
				pins = "sdc1_clk";
				bias-disable;		/* NO pull */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc1_cmd_on: sdc1_cmd_on {
			config {
				pins = "sdc1_cmd";
				bias-pull-up;		/* pull up */
				drive-strength = <10>;	/* 10 MA */
			};
		};

		sdc1_cmd_off: sdc1_cmd_off {
			config {
				pins = "sdc1_cmd";
				num-grp-pins = <1>;
				bias-pull-up;		/* pull up */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc1_data_on: sdc1_data_on {
			config {
				pins = "sdc1_data";
				bias-pull-up;		/* pull up */
				drive-strength = <10>;	/* 10 MA */
			};
		};

		sdc1_data_off: sdc1_data_off {
			config {
				pins = "sdc1_data";
				bias-pull-up;		/* pull up */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc1_rclk_on: sdc1_rclk_on {
			config {
				pins = "sdc1_rclk";
				bias-pull-down; /* pull down */
			};
		};

		sdc1_rclk_off: sdc1_rclk_off {
			config {
				pins = "sdc1_rclk";
				bias-pull-down; /* pull down */
			};
		};

		sdc2_clk_on: sdc2_clk_on {
			config {
				pins = "sdc2_clk";
				bias-disable;		/* NO pull */
				drive-strength = <16>;	/* 16 MA */
			};
		};

		sdc2_clk_off: sdc2_clk_off {
			config {
				pins = "sdc2_clk";
				bias-disable;		/* NO pull */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc2_cmd_on: sdc2_cmd_on {
			config {
				pins = "sdc2_cmd";
				bias-pull-up;		/* pull up */
				drive-strength = <10>;	/* 10 MA */
			};
		};

		sdc2_cmd_off: sdc2_cmd_off {
			config {
				pins = "sdc2_cmd";
				bias-pull-up;		/* pull up */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc2_data_on: sdc2_data_on {
			config {
				pins = "sdc2_data";
				bias-pull-up;		/* pull up */
				drive-strength = <10>;	/* 10 MA */
			};
		};

		sdc2_data_off: sdc2_data_off {
			config {
				pins = "sdc2_data";
				bias-pull-up;		/* pull up */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc2_cd_on: cd_on {
			mux {
				pins = "gpio69";
				function = "gpio";
			};

			config {
				pins = "gpio69";
				drive-strength = <2>;
				bias-pull-up;
			};
		};

		sdc2_cd_off: cd_off {
			mux {
				pins = "gpio69";
				function = "gpio";
			};

			config {
				pins = "gpio69";
				drive-strength = <2>;
				bias-disable;
			};
		};

		pmx_ts_active {
			ts_active: ts_active {
				mux {
					pins = "gpio8", "gpio9";
					function = "gpio";
				};

				config {
					pins = "gpio8", "gpio9";
					drive-strength = <8>;
					bias-pull-up;
				};
			};
		};

		pmx_ts_int_suspend {
			ts_int_suspend: ts_int_suspend {
				mux {
					pins = "gpio9";
					function = "gpio";
				};

				config {
					pins = "gpio9";
					drive-strength = <2>;
					bias-disable;
				};
			};
		};

		pmx_ts_reset_suspend {
			ts_reset_suspend: ts_reset_suspend {
				mux {
					pins = "gpio8";
					function = "gpio";
				};

				config {
					pins = "gpio8";
					drive-strength = <2>;
					bias-disable;
				};
			};
		};

		pmx_ts_release {
			ts_release: ts_release {
				mux {
					pins = "gpio9", "gpio8";
					function = "gpio";
				};

				config {
					pins = "gpio9", "gpio8";
					drive-strength = <2>;
					bias-disable;
				};
			};
		};
	};
};

&pm6150_gpios {
	wcd934x_mclk {
		wcd934x_mclk_default: wcd934x_mclk_default{
			pins = "gpio8";
			function = "func1";
			qcom,drive-strength = <2>;
			power-source = <0>;
			bias-disable;
			output-low;
		};
	};
};

&pm6150l_gpios {
	disp_pins {
		disp_pins_default: disp_pins_default{
			pins = "gpio9";
			function = "func1";
			qcom,drive-strength = <2>;
			power-source = <1>;
			bias-disable;
			output-low;
		};
	};
};